[WIP] Printable Steering Wheels for NRG 2.0/Moza Quick Release
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tried designing 3D printable steering wheels for my Moza base. Still very WIP. Dials and switches not worked out yet.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 229
- Wydruki
- 0
- Wyświetlenia
- 2775
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Thought it would be fun to try to design wheels to print for my Moza QR. I don't have any NRG systems. I might have to tweak some dimensions to make ones that aren't the 2.0 fit.
All of these are printable without supports. You do need good bridge settings.
- Added Test 300 |):
- R250: Caterhams and older formula
- O280: Trackday cars and some GT
- F280: Modern formula, GT, Prototypes etc.
- R300: GT and road cars
- D300: Flat bottom for fanciness.
- R330: Road cars, drift and rally
Line width: 0.6mm (0.4mm nozzle)
Layer height: 0.15mm
Walls: 2-3 Alternate extra
Other settings:
- Adaptive Layer height for top curve.
- Archimedean Chords on bottom layer
- Fuzzy skin on rim
Another thing I was thinking of was possibly adding a pause right before the first top layers to add some epoxy. The extra mass might help it feel more like a normal wheel.
I'm working on flippers and rotaries, though they are far from finished (suggestions appreciated).