Liczymy pasujące modele…
Holder to firmly secure your NRGkick charger on the wall while using it at home. With two simple snap hooks you can open it and take it for a ride if needed. You will need 2 M3x30 bolts and 2 M3 threaded inserts (I used Ruthex inserts…
This custom-designed wall mount is specifically tailored for the NRGkick mobile charging unit. It provides a safe and snug fit to hold the charger vertically on a wall, keeping it off the ground and protecting it from damage or dirt. The…
I broke the original part when I was disassembling my horn for repairs, so I made a 1:1 copy; should you find yourself in a similar position, this will snap right in to your NRG horn. The original freecad model is attached if you need to…
Designed this to allow for mounting of 100mm bolt pattern bass shakers, like Dayton Audio BST-1, to NRG bucket seats without the need for drilling. This mount takes advantage of the seat bottom harness pass-through hole. Tolerances allow…
Thought it would be fun to try to design wheels to print for my Moza QR. I don't have any NRG systems. I might have to tweak some dimensions to make ones that aren't the 2.0 fit. All of these are printable without supports. You do need…
You could use an M6x16 screw to mount it on your Aluprofile, or any M6 countersunk for any other place. So I made two version. Print with 5 Walls / around 20% infill. Version M6x16 Version Countersunk:
Thrustmaster T-series (TX, T300) replacement hub to mount steeringwheels with 70mm bolt pattern or the NRG quickrelase that will also fit Moza steering wheels. I made a contact plate that corresponce with Moza wheels, the way i wired it,…
This custom-designed wall mount is specifically tailored for the NRGkick mobile charging unit. It provides a safe and snug fit to hold the charger vertically on a wall, keeping it off the ground and protecting it from damage or dirt. The…
This piece replaces the clockspring in an NB1 Miata when replacing the original OEM steering with an NRG hub. It allows the horn to work by running your original horn wire to a brass strip screwed into the replacement piece. Printed in…
Improved design to add countersunk nuts for bolts 4mm & 5mm. Removed the need for a interfacing gasket as it just dampened the vibration effects. added a flange to the top bracket so it tightens to the fiberglass seat and not the plastic…
(I have yet to print these but I will make an update when printed) Remix of @cobretti_503884's QR mount. I found that the holes fit what seemed to be an M6 bolt, I needed M8 sized to mount to my rig and added 2 variations. The center…
Inspired by @G3ML1NGZ_215889's Steering wheel horn delete, dickbutt and Miata logo. His Design didnt fit my Nrg Wheel all too well it was a little too wide for the horn button ring. So, I started from scratch taking his idea and,…
I broke the original part when I was disassembling my horn for repairs, so I made a 1:1 copy; should you find yourself in a similar position, this will snap right in to your NRG horn. The original freecad model is attached if you need to…
Recently replaced my '93 Suzuki Carry DD51T steering wheel with an NRG wheel and short hub (SRK-122H) and wanted to keep the auto cancel. The hub is designed for vehicles with the turn signal auto cancel on the wheel vs the Suzuki Carrys…
No supports needed uses 2.3 sized speaker 4x m2.5mmx20mm bolts with nuts
Multiboard Steering Wheel Mount - NRG Style QR (Moza, Simucube, Simagic, Kyostar) A steering wheel mount designed to attach to the Multiboard wall-mounted storage system, built for NRG-style quick release hubs. This should work with any…
This is a horn button I made to order to customize a NRG steering wheel. my ender 3 tends to print a little bigger it x and y (z is normal) than the model measures out to so I had to scale it down to 98.75 (in x and y only) to get good…
Do you have a 1990 NA Miata? Do you want to put a removable steering wheel hub on it? This part replaces the "Clockspring" wire mechanism that connects the airbag and horn wiring to the old steering wheel. Additional parts: You'll need a…
Momo steering wheel holder NRG Innovations SRK-400BK Black Quick Release Thin Version
Remixed the orginal to fit the classic charger. As with the orginal, you will need two M3x30 bolts and two M3 threaded inserts. Support is needed on the hinges and part of the holes, but theese surfaces won't be visible when mounted. I…
Made this to wall mount my NRG Quick Release steering wheel when not in use. Printed at >50% infill No Supports needed Use 4x wall anchors to mount into drywall.
20 M3 heat inserts with H=4mm and some small screws are needed - The ones that came with the original rack case does fit. The bottom and the right side have cutouts for SATA or other cables. I highly recommend printing the top with the…
this model works on both NRG and Works Bell QDs, it's a tighter fit on the works bell, so may need some small filing. there are no clocking divots, so the part can be mounted and the wheel can be installed at any angle.
I was inspired by 3xcelsi0r and his NRG wallmount and decided to make an adapter to mount the wheel from my daily driver to my G27 Base. To mount it I removed the 6 bolts from the stock G27 wheel and removed the JST plugs for the buttons…
My attempt at the rig mount for my NRG QR. The aluminum ones look very good but this does the same job so far :) My wheel weighs in at ~2.1kg(4.6lbs) and right now this is holding it up. Will need more stress testing at this weight so…
You have to drill the holes and put (glue) some foam under the cover to keep the battery in place.
There are some plate supposed to hold the horn that I don't own and I created this to replace them. Basically you need to use two screw to bolt this little ring on the nrg hub, then mount the steering wheel, then mount the horn with the…
Works with both wheel and base side, atteched via two M3x6 countersink screws that came with original part,
![[WIP] Printable Steering Wheels for NRG 2.0/Moza Quick Release](https://media.printables.com/media/prints/1141728/images/8612991_cb4f4524-0367-4923-8c19-0597c50f8998_a45d800e-9d6a-4ca5-a900-1cf6b2d481a5/2025-01-09-22_19_05-steering-wheels-_-assembly-1.jpg)
