Thrustmaster T-series NRG Quickrelease
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thrustmaster T-series (TX, T300) replacement hub to mount steeringwheels with 70mm bolt pattern or the NRG quickrelase
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Thrustmaster T-series (TX, T300) replacement hub to mount steeringwheels with 70mm bolt pattern or the NRG quickrelase that will also fit Moza steering wheels. I made a contact plate that corresponce with Moza wheels, the way i wired it, it will output usb 2.0 on 4 of the pins, and 12V on one pin , so you can connect homemade steeringwheels with usb, or moza bluetooth wheels that needs 12v power. Sacrifice the original thrustmaster spiral cable, solder one end to contact plate and make a USB type B output on the back of the base.
The contactplates are made for springloaded pogo pins, you'll need 5 of TC40-100WR and 5 of M3228-W
You will also need some M3 heatinserts and hardware for the wire clamp. And M5 bolts and nuts for the NRG basemount to my adapter.
Remove the innerpart of the thrustmaster adapter with the 4 screws that goes into the axle, If your unlucky like me and they brake, I designed in two M5 holes on the two sides of it, you can then use a 4,2 drillbit and make holes on two of the sides, and then make M5 threads so you can use two M5 bolts to secure the new adapter thing.
There is also a two part base ring that is optional to make everything easier to take apart the base again.
My steeringwheel for this hub:
https://www.printables.com/model/1597371-paddle-shift-button-box-for-sim-wheel