1 / 4
Miata NA Steering Clockspring to NRG Wiper Adapter — zdjęcie 1
1 / 4

Miata NA Steering Clockspring to NRG Wiper Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Do you have a 1990 NA Miata? Do you want to put a removable steering wheel hub on it? This part replaces the…

Ocena
0 / 5
Polubienia
17
Pobrania
89
Wydruki
0
Wyświetlenia
1331
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Do you have a 1990 NA Miata?

Do you want to put a removable steering wheel hub on it?

This part replaces the "Clockspring" wire mechanism that connects the airbag and horn wiring to the old steering wheel.

Additional parts:

  • You'll need a little piece of brass, bent to form a wiper. I used K&S Precision Metals #8240 0.032x1/4" brass strip. Commonly available in US hardware stores.
  • A #4 (3mm) wood screw to attach the wiper.
  • A 3.3Ohm resistor to delete the airbag and silence the dash light.

General instructions:

  • Remove the clockspring mechanism, wiring harness and all.
  • Cut the wire leads into and out of the clockspring flush with the mechanism
  • Rewire them back together.
  • Bridge the airbag wires with the 3.3Ohm resistor
  • Zip-tie the new wiring harness onto the adapter.
  • Cut and bend the brass spring. See pictures.
  • Assemble your detachable hub, checking the wiring and contacts as you go.

Good luck!

Print Settings

Supports:

Yes

Category: Automotive

Tagi