1 / 4
Miata NA Steering Clockspring to NRG Wiper Adapter — image 1
1 / 4

Miata NA Steering Clockspring to NRG Wiper Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Do you have a 1990 NA Miata? Do you want to put a removable steering wheel hub on it? This part replaces the…

Rating
0 / 5
Likes
17
Downloads
89
Makes
0
Views
1,318
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Do you have a 1990 NA Miata?

Do you want to put a removable steering wheel hub on it?

This part replaces the "Clockspring" wire mechanism that connects the airbag and horn wiring to the old steering wheel.

Additional parts:

  • You'll need a little piece of brass, bent to form a wiper. I used K&S Precision Metals #8240 0.032x1/4" brass strip. Commonly available in US hardware stores.
  • A #4 (3mm) wood screw to attach the wiper.
  • A 3.3Ohm resistor to delete the airbag and silence the dash light.

General instructions:

  • Remove the clockspring mechanism, wiring harness and all.
  • Cut the wire leads into and out of the clockspring flush with the mechanism
  • Rewire them back together.
  • Bridge the airbag wires with the 3.3Ohm resistor
  • Zip-tie the new wiring harness onto the adapter.
  • Cut and bend the brass spring. See pictures.
  • Assemble your detachable hub, checking the wiring and contacts as you go.

Good luck!

Print Settings

Supports:

Yes

Category: Automotive

Tags