1 / 1
NRG quick release to Momo horn adapter / retaining ring
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was my way to hold an official momo horn on a NRG quick release 2.0
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
There are some plate supposed to hold the horn that I don't own and I created this to replace them.
Basically you need to use two screw to bolt this little ring on the nrg hub, then mount the steering wheel, then mount the horn with the connectors.
Then the tolerances are supposed to be tight fit.