Dragon Toolhead for Mosquito + LGX Lite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toolhead & X-carriage mod for any printer. Included custom carriage plate has enough holes/slots for almost any? printer
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
BOM
- 1x Orion 4010 - Blower fans
- 2x 4010 Radial fans
- 2x M3 Heat Inserts
- 2x M3x6 Bolts to attached the cowl to carriage plate
- LGX Lite
- Mosquito
- Other bolts that come with Mosquito+LGX Lite to mount them to carriage plate
I am using this with my custom carriage plate and modified X-axis linear rails (MGN9H). I have also moved the daughter board to the left using my other design.
In my case, I used PCBWay.com to CNC the carriage plate, but I guess a well-printed 3D model should work as well.
For probing, you must design a holder/mount for either Euclid or BLTouch (follow my guide) to be attached to the mount plate (which has plenty of bolt holes/threads), something like the attached step files “Euclid Top/Bottom Case.step”
And obviously, you will need to run Klipper on a RPi for this to work the best (check out this repo)
For detailed info check out the original design of the Voron's toolhead on Github.
The STEP file has all parts. You need to use Orca/Bambu/Prusa slicer to individually create GCODE/STL files for each part
I used ABS to print the cowl and the duct fan since I have my printer enclosed and use ultra-red light to heat it up, so I needed something that could tolerate temperatures up to 80c