P
Printables
Printheads Mosquito
Printheads Mosquito
Wyniki wyszukiwania: mosquito
Liczymy pasujące modele…
P
Printables
Prusa I3 MK3S+ Mosquito Upgrade Extruder Body and Cover as Received from Slice Engineering
The ASA printed parts I received from Slice Engineering, with the Prusa I3 MK3S+ Mosquito Upgrade kit, are slightly different from the original parts, as designed by WickedTwister. The rectangular opening, just above the heater block,…
P
Printables
Delta-P Fan Mount for Prusa MK3S+ with Mosquito
I recently purchased the Mosquito for Prusa MK3S+ upgrade kit from Slice Engineering, that comes with the ASA printed extruder parts. On my previous setup, I've been quite pleased with the Delta-P print fan duct and wanted to use it with…
P
Printables
Rookery for Mosquito Hotend
I have adapted the rookery to fit a mosquito hotend that I had laying around. I used a threaded bowden tube coupler on the top of the adapter since there is no bowden version of the mosquito that I'm aware of. Its shorter that the…
P
Printables
Octenol Attractant Holder for Flowtron Mosquito Magnets
Super simple but very useful – the stuff that 3D printing was invented for 🙂 I have a couple of Flowtron mosquito magnets in my yard but replacing octenol has always been a hassle. The cheap octenol cartridges I buy don't come with…
P
Printables
MOSQUITO MK1 Airsoft Kit
05/06/26 - Check out the new MK1 5.56 model . It is an extension to the MK1 that uses M4 AEG magazines and introduces a new adjustable stock! The MOSQUITO by HYBRID ARMORY is a 3D printed airsoft platform purposefully designed to be super…
P
Printables
Mosquito MK1 rail stock adapter & retractable battery stock
I just started learning plasticity and needed a new project. So i turned over to my beloved Mosquito mk1. At first when printing the Mosquito ( ) i used the foldable stock. Though it was too loose for me. Also the stocks are a little too…
P
Printables
Classic short handguard and battery stock adapter MOSQUITO MK1
Some interestin variations handguard and battery adapter for comfortable shooting in a protective mask (CQB)
P
Printables
One Puunch Man Mosquito Girl Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
P
Printables
Anti mosquito window
Made for the israeli house windows, need to buy netting separately and glue it. Measure before print.
P
Printables
Picatinny rail adapter for mosquito mk1 folding stock
adapter to use folding stock from mosquito mk1 3d printed airsoft gun (free 3d print) on any picatinny rail Your need: 2x M4 x 30 screw, 2x M4 nut
P
Printables
Armadilha para mosquitos e pernilongos baseada no Manual do Mundo
Armadilha de pernilongos e mosquitos, muito prática e que captura muitos. Infalível: mata-os de vez. Sem produtos químicos nem odores desagradáveis. Experimente e você não vai se arrepender, com certeza. Baseada no vídeo do = Manual do…
P
Printables
Suporte espiral anti-mosquitos / Soporte de espiral anti mosquitos / Anti mosquito spiral stand
Português brasileiro = Suporte prático para queimar espirais repelentes de mosquitos. Vamos precisar de: 1 - Pedaço de arame fino e pequeno para passar pela espiral. 1 - Pedaço de papel-alumínio de cozinha. Depois de vários testes e de…
P
Printables
Armadilha Mosquitos / Trampa Mosquitos / Mosquito Trap
Português Brasileiro = Armadilha prática para mosquitos e pernilongos. Muito fácil de usar: basta preparar a mistura (veja abaixo), colocar no frasco, fechar e deixar agir. Em poucos dias, você começa a ver o resultado. Projetamos esse…
P
Printables
Mosquito MK1 Bent Stock (Vector-Like)
My Mosquito is still WIP (hence the duct tape on the grip). But from my dry testing, I feel that the default foldable stock is a bit too high (in other words — the stock pad part is too short). So I tried to design my own version, and I…
P
Printables
Mosquito MK1 QD Mount
Its simple QD mount for Mosquito mounted on folding stock adapter (but probably will work fine on battery stock adapter). There's 2 versions of this attachment, first which is "bulkier" and second, which is slimmer, but I didn't test it…
P
Printables
Mosquito Magnet plug lid
UPDATE: there is another way of doing this at https://www.thingiverse.com/thing:4669166 This mashup allows you to deploy mosquito lure for a Mosquito Magnet using a mesh container. It combines the lid of a desiccant container with the…
P
Printables
Mosquito Glue Trap Stand - Your Solution for a Mosquito-Free Home!
A cage of a mosquito trap, to keep birds and others safe.
P
Printables
MOSQUITO Airsoft Kit (Open Beta 2)
03/09/25 UPDATE: Check out the final release here! The MOSQUITO by HYBRID ARMORY is a 3D printed airsoft platform purposefully designed to be super compact, lightweight, and modifiable, enabling you to be the real menace on the airsoft…
P
Printables
MOSQUITO V1 - 14MM Counter-Clockwise Threaded Barrel
Remixed the barrel to have a 14mm counter-clockwise thread for muzzle attachments.
P
Printables
Halfmoon mosquito spiral holder
I needed a holder for the mosquito spiral, this is my proposal… Use a 2-3 mm steel pin
P
Printables
Snail mosquito spiral holder
It's another mosquito spiral holder. The spiral resembles the snail housing To make the spiral hanging pin look at the photo sequence. Happy printing !
P
Printables
Mosquito spiral vase holder
It's another mosquito spiral holder. To make the spiral hanging pin look at the photo sequence. Happy printing !
P
Printables
BondTech DDX v3+Mosquito Hotend - Ender 6 cooling duct single 10mm Fan
The original cooling duct that came with the DDX was not doing it so I made my own.
P
Printables
Needle Splinter and Small Wound Pain Blocker Mosquito Bite Relief
This is my very first upload so be gentle. UPDATE! We've found that this tremendously reduces itching from mosquito bites. If you feel like itching the bite, just pull this out of your pocket and press it into your skin around the bite.…
P
Printables
Mosquito Insekten Stichheiler Halter
ich habe mir in der Apotheke ein Mosquito Insekten Stichheiler gekauft fürs Handy da zwei teile nur über ein Stecksystem verbunden sind habe ich einen Halter gebastelt wo der Mosquito Insekten Stichheiler reinpasst und nicht rausfallen…
P
Printables
Bondtech DDX Strain Relief and Mosquito Magnum Adapter
This video is a complete walkthrough for the Bondtech DDX extruder upgrade for your Creality 3D printer. I am also installing a Slice Engineering Mosquito Magnum hot end with 50W heater cartridge and 300 degree thermistor. This…
P
Printables
Mosquito-Proof Self Watering Planter
*10/28/19 Note: The PLA pot melted and deformed some when we had a bunch of days with temperatures over 90. I recommend using PETG if you think the pots will be in that kind of heat.* I wanted to try growing some herbs in a self watering…
P
Printables
Cyma Selector Plate (Mosfet Edition, CM02G) For Mosquito Airsoft Kit (Open Beta 2)
A quick modification to the provided selector plate to be compatible with the cyma ak gearbox that comes with a mosfet. Installs in the same way as the original Mosquito selector plate. Allows semi/full-auto with the cyma ak upgraded…
P
Printables
Mosquito curtain for a teardrop trailer
A set of curtain hooks and a mounting bracket to hang mesh material over the trailer door to keep mosquitos out. From an experience: in such a small trailer the curtain sometimes gets sat on, which pulls it down. The design here thus uses…
P
Printables
Handgrip for mosquito screen.
Design can be adjusted to your needs. Fusion 360 files included!
P
Printables
Chain piece/guide (fitting for Awilux mosquito net)
This is a chain link suitable for the Awilux insect net. The original manufacturer refused to provide broken individual chain links for us, so we took matters into our own hands and created a fitting link in FreeCAD. These are designed to…
P
Printables
5 gallon bucket lid spacer for use with Mosquito Dunks / Mosquito Bits
This is a bucket spacer made to keep bucket lids slightly off of the tops of 5 gallon buckets. On our property we use these to enable mosquitoes to enter and lay their eggs in Mosquito Dunk water in order to control the mosquito…
P
Printables
50 BMG Barrel for Mosquito Beta 2 (broken)
Front assembly barrel part extended to be longer and with silly muzzle break
P
Printables
Window Clip for Fly Screen (Mosquito Net) / Fensterclip für Fliegengitter
Window Clip for Fly Screen This window clip is designed to attach a fly screen to a window. The system consists of two main components: Base Clip – The clip that is glued to the window frame. Cover Clip – The clip that snaps onto the Base…
P
Printables
Orbiter 2.0 Prusa Bear Extruder Mount for Mosquito Hotends
This is a Prusa Bear compatible mount for Mosquito hotends when using the official Orbiter v2.0 extruder. I have also added a 17.5mm PTFE cutting jig with a 45 degree bevel to fit the metal exit of the Orbiter better. This mount uses the…
P
Printables
MP5 AEG Curved Mid Cap Mag for Mosquito & Cyma (BETA WIP)
Update 2025-10-14: Removed the remix link to glgr's Curved MP5 magazine . My mag has grown different in every way and is no longer based on his mag design. A remix link no longer made sense. Fitment is based on Cyma's metal-shell AEG…
P
Printables
EVA 3 Mosquito/NF-Crazy for 25mm fan
The Mosquito/NFCrazy was designed to use a 25mm fan directly mounted to it. Besides being lighter & quieter. This model adds the ability to mount a 40mm or 25mm fan, and to mount from top mounting screws and/or front mounted screws (same…
P
Printables
Airsoft mosquito side rail
AIRSOFT MOSQUITO SIDE RAIL I'm print it with 1mm nozzle but i suggest to print with 0.4/0.6mm, works well. you requiered only a 3mm screw
P
Printables
Larger Retractable Stock for Mosquito Airsoft with Parametric Files
Update 2025-09-11: Added adapters for the Mosquito MK1. You will need supports for the MK1 adapters. See screenshot for details. Update 2025-06-10: Changed the tolerances for the latch cutouts since it was too tight for some users, added…
P
Printables
Mosquito Larvae
A Mosquito Larvae. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
P
Printables
Bloated Mosquito
A Bloated Mosquito. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
P
Printables
Giant Mosquito
A Giant Mosquito. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
P
Printables
Prusa I3 MK3S+ Mosquito Upgrade Extruder Body and Cover as Received from Slice Engineering
The ASA printed parts I received from Slice Engineering, with the Prusa I3 MK3S+ Mosquito Upgrade kit, are slightly different from the original parts, as designed by WickedTwister. The rectangular opening, just above the heater block,…
P
Printables
Delta-P Fan Mount for Prusa MK3S+ with Mosquito
I recently purchased the Mosquito for Prusa MK3S+ upgrade kit from Slice Engineering, that comes with the ASA printed extruder parts. On my previous setup, I've been quite pleased with the Delta-P print fan duct and wanted to use it with…
P
Printables
Mosquito V2 stock with a battery case, volt meter and auto on.
I like plinking to relax at work. It annoyed me that I had to load the battery every time, connect it - faff in general. This mod makes the original stock by Miki much larger, adds a case for a 11.1V LiPo battery, a volt meter and a…
P
Printables
DH98 Mosquito Lithophane Lampshade
Lithophane lampshade of a DH98 Mosquito in flight. Specifically KA114 flying over New Zealand. I modified the photo from Bob Leask and replaced the sky with one that tiled and was better suited to be used as a lithophane and so there was…
P
Printables
Mosquito Magnet executive bug bag lid
Replacement lid for the Mosqutio Magnet Executive bug bag. Recommended to print with PETG to prevent deformation out in the sun.
P
Printables
voron 0 Mini afterburner 30mm fan for mosquito
This is not a tested design. Just a remix for a friend. Took the dragon mini afterburner and layed it over the mosquito afterburner . Then I modified the Mosquito version to fit the 30mm fan which is usually included in the voron 0 kits.…
P
Printables
Dragon Toolhead for Mosquito + LGX Lite
BOM 1x Orion 4010 - Blower fans 2x 4010 Radial fans 2x M3 Heat Inserts 2x M3x6 Bolts to attached the cowl to carriage plate LGX Lite Mosquito Other bolts that come with Mosquito+LGX Lite to mount them to carriage plate I am using this…
P
Printables
CR-6 X-axis Carriage Plate for Linear Rails and Mosquito Hotend
Check out my full design for more info
P
Printables
Mosquito M4 Mag Conversion V2
UPDATED, looks a little better now, have been working on one that alters the receiver as well but haven't finished… Feed tube has a slot for an O-ring to go externally, I used one with a 4mm radius and hooked it over the squared off ledge…
P
Printables
Handle for Mosquito Screen
Sometimes the simplest solutions are the best, for an annoying everyday problem. Screw this handle right through the net with 2 M3 screws, and it's done.
P
Printables
Mosquito and cat alu frame supports
STD alu frames for mosquitos fences are 70 cm large (I use this to avoid my cat to exit). I need something to fit in my 75 cm door. So I realized this supports that mount on the Alu profile. One model is for the corners and another for…
P
Printables
Mosquito and Sherpa mini mount for HevORT
My attempt to make the mounter for the Mosquito hotend and Sherpa mini extruder. You will need some M3xD4.2XL3.0 brass thread insert to assembly the mounter. The 5015 fan duct is from Bear Extruder. 2020-12-06 : New design with better…
P
Printables
Mosquito Clone Silicone Sock
The mold is for resin printing. It is designed with M11x1.5 thread to accept standard 60ml silicone containers (high temp silicone/engine gasket silicone) Mold release agent must be applied before injecting the silicone for easy release.…
P
Printables
NATO rail for Mosquito airsoft kit (Open Beta 2)
NATO standard rail for Mosquito airsoft (Open Beta 2). I had to leeway on some dimension in order to fit the original design , but those dimension aren't critical.
P
Printables
Mosquito M4 Conversion V3, Stock Plate extension, and better threads!
You will need a m3x40mm screw and a m3 (preferably lock) nut for and the similar spring to original (maybe longer) for the mag catch system, install like a real one. You will need two m3 nuts and two m3x12mm screws for the mag flare /…
P
Printables
Front & Back fan shroud for Prusa MK3S (for Mosquito, NF-Crazy and others)
This is part of my Mosquito hotend adapter for Prusa MK3S, based on Cadmium's design. (Look here for editable Fusion 360 files: https://www.prusaprinters.org/prints/117491-mosquito-mellow-nf-crazy-hotend-mount-for-prusa-mk ) I create this…
P
Printables
Mosquito & Mellow NF Crazy hotend mount for Prusa MK3S
Update 2022.01.01. - Tested and working daily for a year now without any issue! Based on Cadmium's original Mosquito adapter (Link below). I had to modify it a bit so it fits the slightly different heat block of the NF-Crazy hotend. More…
P
Printables
Ambidextrous Mag release for mosquito m4 conversion
Printed mine with some generic petg at 235C bed 75C 0.12 layer height with snug supports tested mine with 70% infill print at the orientation the file is or you can test what works for you still uses the same m3 nut and screw for the m4…
P
Printables
Mosquito net holder
I love nature, but I definitely hate mosquito. So if I want to create a simple / low cost mosquito net without drilling the walls. Hence i built this mosquito net holder using fusion 360 which i recommend. This is my first project, so…
P
Printables
MMUS 2S Extruder MOD + Mosquito hotend
This is a remix from the MMU2S extruder MOD and mosquito hot end extruder https://www.thingiverse.com/thing:4700747 You need the extruder-idler from prusa for MMU Coplemod is for 10mm PTFE COUPLER
P
Printables
SK-Go2 - LGX+Mosquito - carriage
Extruder SK-GO2 carriage for Bontech LGX extruder with Mosquito hotend. This is remix of Ernest Lin's design https://github.com/SecKit/SK-Go_SK-Mini/tree/master/extruder%20carriage%20STEP%20file There are few changes to original: motor of…
P
Printables
NBD Mosquito 660 battery mount v2
I have been working on a custom build on the newbeedrone mosquito frame on and off for a while now and was not satisfied with all the issues and annoyance of trying to use rubber bands Printed with inland generic tpu, at 100% infill in…
P
Printables
Rookery for Mosquito Hotend
I have adapted the rookery to fit a mosquito hotend that I had laying around. I used a threaded bowden tube coupler on the top of the adapter since there is no bowden version of the mosquito that I'm aware of. Its shorter that the…
P
Printables
Cat Flap Mosquito Screen - Oneway Flapping mod
We let our cats leave the house only on certain conditions but let them come back whenever they want, So i've designed this modification to replace the original “Top” part. Print and install all the other parts as in the original. The…
P
Printables
Mosquito Picatinny Stock Attachment
Allows you to mount picatinny stocks to the mosquito V1.
P
Printables
Mosquito Coil Holder
🌿 Modern Design Mosquito Coil Holder – Your elegant ally against mosquitoes! 🦟 This innovative mosquito coil holder is the perfect fusion of aesthetics and functionality. Each model in the collection features slight variations, making it…
P
Printables
Voron AfterBurner Mosquito Magnum+
I made this remix because the original did not have enough room for the larger heat sink of the magnum+, and cable management was almost impossible. I made the heat sink fit and created extra room for cables. I made a block to be able to…
P
Printables
Octenol Attractant Holder for Flowtron Mosquito Magnets
Super simple but very useful – the stuff that 3D printing was invented for 🙂 I have a couple of Flowtron mosquito magnets in my yard but replacing octenol has always been a hassle. The cheap octenol cartridges I buy don't come with…
P
Printables
CR-6 Mosquito and Orbiter V1.5 direct drive mount to the CR6 strain gauge.
Overview: This mount is part of a growing series of mounts for different hotends and extruders to the CR-6 strain gauge. I will be porting the designs from the GitHub (https://github.com/KoenVanduffel/CR-6_Strain_Gauge_Mounts) where they…
P
Printables
40mm outlet through mosquito net
cover with a plug for passing a hose up to 40mm through a mosquito net. I use this to extract smoke from a laser. For assembly you will need: You will need 2-8 magnets 5.5x2mm. and also 2-8 metal screws 3.5x4mm.
P
Printables
Beer / Soda Can Solutions - Fly / Mosquito Trap - WIP
WIP - Bug trap based on 330 ml contained - beer or soda can - that can be cut on the top part…preferably after consuming the delicious beverage :D. I designed these parts from scratch after looking for models and inspiration across other…
P
Printables
Mosquito Venom Sucker
Suck venom out of mosquito bite. If the bite is fresh it will prevent the scratching part. I used a 18X2.4 mm O-ring. O-Ring can be printed out of TPU and there many models on printables. A little dab of silicone grease on the O-Ring will…
P
Printables
5020 cooling fan adapter for bondtech+mosquito hotend
wanted to use 5020 fan. because they are more silent than 5015 fans and airflow is pretty nice. edited that hotend's fan duck and fan mount files. supports are needed.
P
Printables
Mosquito trap with fan
Needed additional parts: 120mm or 92mm 12V fan (12V is safer for outdoor use) 100mm female-female PVC pipe adapter M4 nuts and bolts Enclosure of your choice Catch bag Olfactive attractant For the enclosure, take care to let an air flow…
P
Printables
Push-out tool for filling to electric mosquito repellent.
Push-out tool for filling to electric mosquito repellent.
P
Printables
Mosquito mesh screen for small port hole
This is a three-part replacement mosquito screen for a boat's port hole . Opening is nominally 128mm and replaces a proprietary product (that doesn't work well). The mesh must be printed separately because it uses zero top and bottom…
P
Printables
Prusa MK3s Mosquito Magnum+ + LGX Lite Extruder (Orbiter 2 mount)
A hogwash of parts that make the mk3s take a mosquito magnum+ and a lgx lite through a orbiter 2 adapter. It should fit either bear or stock x ends due to the hybrid carriage. This can take 2 heater cartridges with the carriage missing a…
P
Printables
Mosquito Larvae Dipper - For Grate Catch Basins
Both parts printed in white PETG Cup printed at 100% infill Screw end was designed with an Acme style screw to fit on the end of brooms and paint arms. It is to be attached to the cup with a nut and bolt or a pin system like shown in the…
P
Printables
Mosquito Coil Holder Stand Zampirone Spirales
Keep mosquitoes away with this simple and practical coil holder! Enjoy your summer evenings bite-free! Easy to assemble: Just insert the metal plate between the base and the lid, lift the metal tab, and hook the mosquito coil securely. If…
P
Printables
Mosquito emergence container
This modular mosquito emergence container was designed using open-source CAD software for the support small-scale laboratory mosquito research. It enables precise monitoring of mosquito development from larvae or pupae to adults, offering…
P
Printables
Cranefly Doron Velta Micro Sherpa beacon Mosquito mod
Thanks to him for sharing the step file. I modified it to an extent I needed it for the Micro Sherpa CNC, Mosquito and Beacon including a Mellow ADXL. Note, the cutout for the stepper is not perfect, but I wasn't going to fix that (yet).…
P
Printables
mosquito silicone sock mold
This is a mold with wich you can cast a silicone sock for the mosquito hotend by your self. For casting i usually use 2k high temp casting silicone which works really nice and also doesn't stick to the mold. Personally I use the…
P
Printables
Murphy's mosquito repellent candle, detachable wall mount/holder
I wanted to be able to mount the Murphy's mosquito repellent candle near the door, or any convenient location outside, so I designed the easy-to-print, easy to mount/unmount candle holder. The candle fits snuggly in the candle holder, and…