1 / 1
Mosquito Mount for EVA3 (Better Airflow + Extras)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EVA3 mount for Mosquito hot ends. Improves airflow and supports 25 & 40mm fans. Includes new minimalistic shrouds.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 1475
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 9)Remiksy (0)Kolekcje (32)Powiązane
This is an improved airflow mount for Slice Engineering's Mosquito and Mosquito Magnum hot ends compatible with the excellent EVA 3 Modular Carriage Platform.
These models offer the following improvements / features:
- Improved the airflow through and around the Mosquito hot end to minimize the risk of heat creep.
- Mount is compatible with both 25mm and 40mm fans.
- New Eva 3 minimalist shrouds also works with 25mm or 40mm fans. Shrouds require the optional Mosquito Air Front Universal part.
- The Front Universal model provided here thickens the top slightly so it sits flush with the Mosquito Air mount and is easier to install. This is optional as the Mosquito Air mount also works with the default Eva 3 Front Universal part. Note: This model does NOT have the ADXL mount found on the default part.
Print in PETG, ABS (preferred), or PC (preferred). I used 5-10 perimeters with a 23% infill and a .3 layer height. Files are prepositioned on the print bed and supports are not required.
Happy Printing!