1 / 3
Creality Ender 7 Direct Drive LGX Lite and Mosquito Magnum — zdjęcie 1
1 / 3

Creality Ender 7 Direct Drive LGX Lite and Mosquito Magnum

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,82 € – 1,00 € netto (bez VAT)

Dla pliku: Ender7_230-190_8-22.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,91 € netto (środek widełek).

Masa podana przez autora
20 g
Czas druku podany przez autora
30 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Bondtech LGX Lite and Mosquito Magnum Installation and Mounts for the Creality Ender 7

Ocena
5 / 5
Polubienia
50
Pobrania
737
Wydruki
2
Wyświetlenia
4730
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

In this video we are going to breathe some fire into "Project Dragon Rising" - The Creality Ender 7 printer that I have been modifying. The Bondtech LGX lite extruder combined with Slice Engineering's Mosquito Magnum hot end should bring the heat!

First we will benchmark the existing hotend from Creality and see what volumetric flow rate this machine is capable of from the factory. We will be using  @CNC Kitchen  flow rate test to perform this analysis. I have edited the gcode files to be compatible with the Creality Ender 7. You can find them HERE on this page in the gcode section. 

Then I will walk you through the installation and all extra considerations for the new equipment. This includes changing the esteps of your firmware, along with running a PID autotune, and making adjustments for the new nozzle offset. Currently there is no known open source Marlin configuration file for the Creality Ender 7 and so I had to reuse the old thermistor. 

In a future video I will be installing Klipper, which will allow me to run a custom thermistor and higher melt temperatures. This will also unlock more advanced features such as linear advance and input shaping. 

For a more detailed methodology of performing the bed leveling procedure: 

With CR Touch: 

Without CR Touch: 

If you are looking to support my work and get something in return, check out my website where you can find the printed parts in this project for sale. They are printed in carbon fiber PETG and will look beautiful on your machine. I also have other Ender 7 upgrades for sale such as the double sided magnetic flex plate and the triple lead screw z axis kit as seen in this video: 

https://www.embracemaking.com 

You can find the Bondtech LGX lite here: 

https://www.bondtech.se/product/lgx-lite-large-gears-extruder/ 

and the Mosquito Magnum Hot End here (use this link to access discounts or code CHRIC5) 

► https://www.sliceengineering.com/embracemaking

If you are looking to print your own parts, YOU ARE HERE on my Printables page for this project. I have put a lot of time and effort into these designs. I would greatly appreciate your support by simply engaging with my content on YouTube, and leaving a like or rating on Printables. It goes a long way in helping me grow my channel and content!

 You can find the BLtouch/CRtouch firmware for the Ender 7 here:

► https://embracemaking.com/products/creality-ender-7-bondtech-lgx-lite-mosquito-magnum-hot-end-kit

Scroll to the bottom of the listing to find the download link.

If you have any questions, please leave them in the comments section below as I try to reply to every single comment! Thank you! 

*NOTE Printables is not allowing me to add the gcode file to change your esteps automatically because of the M500 command. See the gcode below… it is simply 2 lines. Copy and paste the code into a notepad document and save it with .gcode file extension. Put it on an SD card and run it on your printer to change your esteps.

M92 E562 ; Set E Steps to 562
M500     ; Store Settings

#3Dprinting #Creality #Drucker

Tagi