Mosquito M4 Conversion V3, Stock Plate extension, and better threads!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an updated design of the receivers to take M4 mags. Room for a MOSFET, and more easily printed threads.
- Ocena
- 4 / 5
- Polubienia
- 56
- Pobrania
- 203
- Wydruki
- 3
- Wyświetlenia
- 1623
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- GNU General Public License v3.0
You will need a m3x40mm screw and a m3 (preferably lock) nut for and the similar spring to original (maybe longer) for the mag catch system, install like a real one. You will need two m3 nuts and two m3x12mm screws for the mag flare / trigger guard install. Extended stock plate needs 2 m3x12mm and two m3x20mm screws. I believe all else stays the same. If using the extended stock plate without revamped threads, use stock ring. Feed lip has a notch you can add an o-ring to externally if you want bb retention, don't block the feed tube too much or mag wont be strong enough to push bb's past fast enough.
UPDATE: I changed the orientation of the STLs so they should import with proper orientation now. In my testing (Cura) they do.