Mosquito M4 Conversion V3, Stock Plate extension, and better threads!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an updated design of the receivers to take M4 mags. Room for a MOSFET, and more easily printed threads.
- Rating
- 4 / 5
- Likes
- 56
- Downloads
- 203
- Makes
- 3
- Views
- 1,616
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- GNU General Public License v3.0
You will need a m3x40mm screw and a m3 (preferably lock) nut for and the similar spring to original (maybe longer) for the mag catch system, install like a real one. You will need two m3 nuts and two m3x12mm screws for the mag flare / trigger guard install. Extended stock plate needs 2 m3x12mm and two m3x20mm screws. I believe all else stays the same. If using the extended stock plate without revamped threads, use stock ring. Feed lip has a notch you can add an o-ring to externally if you want bb retention, don't block the feed tube too much or mag wont be strong enough to push bb's past fast enough.
UPDATE: I changed the orientation of the STLs so they should import with proper orientation now. In my testing (Cura) they do.
