Search results: mag

Counting matching models…

Mini Articulated Dragon (Magnet/Keychain)

Magnet Size 6x2mm * for commercial license, Please visit my Patreon

Downloads: 91,066
Likes: 9,139
Rating: 4.93

Printableskaje

Magnetic Holder for Pushbutton Switch

This little gizmo holds a miniature pushbutton switch (see photos) and has magnets on the bottom to enable it to be held firmly on steel/iron metal surfaces. The pushbutton switch used is designed to be panel mounted in a 1/4" (7mm) hole.…

Downloads: 27
Likes: 5
Rating: 0

Order a print of this model

PrintablesJeff M

Magnetic Case for Synaptics Coralboard SL

Magnetic Case for Synaptics Coralboard SL A compact magnetic enclosure designed for the Synaptics Coralboard SL development board. The enclosure provides quick access to the board while maintaining access to essential development…

Downloads: 0
Likes: 0
Rating: 0

Order a print of this model

Printables._.

Hma Radio PTT Switch Enclosure for M12 Push Button, Snap-Fit Magnetic Base

Overview A compact desktop housing for the common 16 mm, M12x1 thread momentary push button (the red-cap style). The base snaps on without screws, a hidden magnet holds it to steel surfaces, and the cable enters at an upward angle to keep…

Downloads: 0
Likes: 0
Rating: 0

Order a print of this model

Printables

Prusa Mini Enclosure Door Handle with PTFE Magnetic Coupler

About I used hole in the doors of the Original Prusa MINI Enclosure as an entry point for filament PTFE tube. Moved handle for fingers a bit lower, and added magnetic coupler in there for s 6x2mm magnets, which are popular in gridfinity…

Order a print of this model

Printables

Pokemon Electrode - fridge magnet

Easy to print magnet for fridge - pokemon electrode. You need one magnet 4x2mm

Order a print of this model

Printables

Blink (4th Gen) Outdoor Security Camera Rubberized Magnetic Mount for Vans

I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…

Order a print of this model

Printables

Voltorb - Pokemon fridge magnet

Easy to print magnet for fridge - pokemon voltorb. You need one magnet 4x2mm

Order a print of this model

Printables

Pokemon Magikarp | Home Decor | Gift for Pokémon Fans | Wall Art

The Screaming Magikarp, the perfect picture for every pokemon fan with a sense of humor, the picture that will make every elderly person you know question your taste in decor, Category: 2D Art

Order a print of this model

Printables

Demon Slayer Zenitsu Agatsuma Magnet | Decoration For Whiteboard, Refrigerator, Locker, Cabinet | Home & Kitchen Essential, Classroom Office Supplies | Anime Gifts and Collectibles

DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Zenitsu Agatsuma magnet. Category: 2D Art

Order a print of this model

Printables

Magnetic Pencil Holder

Slides onto a pencil. Holds a 6mm x 3mm magnet. Suggest to superglue magnet in place. Quick to print. Print in TPU.

Order a print of this model

Printables

Watch Band Magnetic Clasp

I modified the standard link to incorporate circular slots for magnets. I also created a spring clasp, but I like the magnet version better. And I made a female-to-female link segment. I've added all the files here. If you have a FitBit…

Order a print of this model

Printables

Magnetic chess board

Discover our 3D-printed chessboard with embedded magnets—a perfect blend of modern technology and classic strategy. This sleek, durable board features magnets that keep pieces securely in place, ensuring a stable and uninterrupted game.…

Order a print of this model

Printables

Housing for Simple Handled Thermal Imager

The SHTI (Simple Handled Thermal Imager) found on Amazon HERE (not affiliated, I don't make money from this link) comes as a bare circuit board. I made a basic housing to protect it. It includes an optional lens guard that can be glued…

Order a print of this model

Printables

Fidlock Twist Magnetic Bike Base - 13x2.5mm magnets - Remix

Replica of the genuine Fidlock magnetic base. Model has two internal cavities to drop in magnets during print then print over the top. Pause print at desired layer height to place the magnets. (Layer 60) Magnet size is 13x2.5mm. Careful…

Order a print of this model

Printables

Flex Cup Insert for Magnetic Tray

The first iteration is a single insert for a 3" magnetic tray. The one in this set . In addition to being a great TPU stress test, the idea here is that it's way easier to pick up all the parts in the tray at once by just lifting the TPU…

Order a print of this model

Printables

Flex Disc Insert for Magnet Tray

I set the print height at 0.20mm for three layers of TPU. Then, stuck in place with thin double-sided tape. The idea really works with any filament, but I like TPU in this application for the cushion effect.

Order a print of this model

Printables

Magnet Insertion Tool v2

UPDATE 24.09.2024 8x3mm Magnet Variant added (not tested by me as i dont have those magnets. These magnets may be too strong for this variant) UPDATE 20.09.2024 6x3mm Magnet Variant added INTRODUCTION v2 of my Magnet Insertion Tool, with…

Order a print of this model

Printables

Magnetic Quarter Launcher! Coin Flipper!

Play by yourself or compete with an opponent or play with teams; you make up the rules for your game! Hardware needed: 2 x Neodymium magnets, 5mm x 10mm x 60mm. 1 x steel rod, 3mm diameter x 65mm long. Glue (optional) 4 x Anti-Slip self…

Order a print of this model

Printables

K1 Series Quick release magnetic tool head cover.

Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…

Order a print of this model

Printables

Magnetic storage box for fridge

We do have a lot of magnets from WolffKids to plan the week together with my kids. To organise the magnets itself I was looking for a solution. The vendor does have a similar one but I wanted to design it myself. The box can be printed…

Order a print of this model

Printables

Universal AV Converter stand, for Blackmagic, Decimator, AJA, AVMitrix, Magewell Lightware and many more.

With this space saving stand you have lots more space on a AV rack to put on your converters for the job. It is universal for all well known rental used converters between a thickness of 17 to 30mm (from 11/16 to 1 3/16). there is Velcro…

Order a print of this model

Printables

Halloween Magic Rune Circle - Vegvisir

This magical runic circle allows you to cast spells like a real wizard or witch on Halloween or every other night at Midnight. Unleash your best curses accompanied by wicked laughter, wave a magic wand over the runic magic disc, and light…

Order a print of this model

Printables

Tikka long action 3,56'' AICS 10 & 6 round mag 6.5x55

6 round mag tested with over 300 rounds. 0 feed issues. 10 round mag feeds well in testing so far. (150 rounds tested) Printed with auto tree supports hotplate only. prusament PLA 0.16 layer hight 0.2 first layer 70% infill 4 walls spring…

Order a print of this model

Printables

Tiny Whoop Drone Racing Gate (fully printable, parametric, magnetic)

Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…

Order a print of this model

Printables

Tesla Model 3 / Model Y MagSafe Charger (Updated to include Highland / Juniper)

UPDATE: Updated to include a version for Juniper Model Ys and Highland Model 3s. I don't have either of those so I tested this on a rubber mat designed for those vehicles. ORIGINAL The camera bump outs on my iPhone14 were preventing the…

Order a print of this model

Printables

Magnetic or Clip Hexagonal Token Trays, Dice Trays & Dice Tower.

This is a set of token trays, dice trays and a dice tower with tray. Each one has a width (face to face) of 100mm (4") and a height of 12mm with a curved 10mm deep x 90mm wide well. They can either be clipped together using the supplied…

Order a print of this model

Printables

Parametric Laser Cut Gridfinity Base Plate with or without Magnets

Fusion360 Parametric Laser-Cut Gridfinity Base Plate by The Mad Noodle Introducing a versatile and customizable Gridfinity Base Plate designed for laser cutting! This fully parametric design, composed in Fusion360, offers flexibility of…

Order a print of this model

Printables

Screw Tray with magnets

This screw tray was designed to collect the screws when taking electronics apart ;) It's a bit higher (22mm tray inside) to keep a decent amount of them. The rounded edge on the inside is to get the screws out easier. At the bottom of the…

Order a print of this model

Printables

Customizable knife box with magnetic lid

I always wanted to take my favorite knife with me to picnics or the pool. So I designed a fully customizable box for this knife held together with small magnets. The box is fully customizable (see pictures) in Fusion 360 where it was…

Order a print of this model

Printables

DJI RC2 Phone Holder (MagSafe/PixelSnap)

I have a DJI RC2 controller for my drone, but I wanted to mount my phone on the bottom so I could track the air traffic through an app called Flightradar24 . My phone has PixelSnap so I bought one of those holders to attach it to the RC2.…

Order a print of this model

Printables

Army Armament R504 extended mag release tab

Designed to fit the Army Armament R504, but probably fits other HiCapas as well, as long as they have a threaded hole on the mag release. You will only need a small screw to fit the hole. Included are 3 STLs, a plain one, one with…

Order a print of this model

Printables

Ergonomic HiCapa magazine loader

Works on HiCapa magazines and possibly other magazines with similar dimensions. Tested on Army Armament and extended magazines. Designed to be ergonomic, has two tabs for better grip. And a non-obtrusive lanyard hole.

Order a print of this model

Printables

Magnetic plumbus (camera mount)

I needed a way to mount an esp32-cam case to a metallic surface and had some 20x4mm magnets laying around. I printed this in TPU and it turned out ok. To make it work: Pause the print and insert magnets at the layer just before recesses…

Order a print of this model

Printables

7 Magnet Habach Bar Array

This is the case for a 7 magnet habach array that a friend requested. It requires seven cubic magnets 1cm x 1cm x 1cm with known poles. Please note that this can be a dangeous item to make and should not be played with. Habach arrays are…

Order a print of this model

Printables

75 mm Large Magnetic Cable Arch

Inspired by the LTT magnetic cable management holders I designed these to go with 16 mm diameter x 5mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Each Magnets:…

Order a print of this model

Printables

75mm Small Magnetic Cable Arch

Order a print of this model

Printables

50mm Tiny Magnetic Cable Arch

Inspired by the LTT magnetic cable management holders I designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…

Order a print of this model

Printables

Magnetic Velcro-Tie Mount

Order a print of this model

Printables

Keystone Magnetic Mount

This magnetic keystone single jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S…

Order a print of this model

Printables

Dual Keystone Magnetic Mount

This magnetic keystone dual jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S Inserts:…

Order a print of this model

Printables

Haken und Rasiererhalte für Duschregal mit Magnet

Haken und Rasiererhalte für Duschregal mit Magnethalterung. Die Magneten halten die Haken nicht. Sie dienen der Beschwerung und sollen das leichte verrutschen am Metallregal verhindern. Die Magneten haben die Masse 6mm x 2mm

Order a print of this model

Printables

Toyota RAV 4 (XA40, 2012-2018) Magsafe holder adapter

BEWARE: this is a really bad model! :) I don't use CAD software - i am Mr. Slicer Editor (lol) - download at your own cringe risk! I wanted to have a Magsafe holder for the mould in the Toyota RAV4 front center console. It has like a…

Order a print of this model

Printables

Magnetic board game bits trays for 6mm x 3mm magnets

Modified the magnet holes to fit 6mm x 3mm magnets Also had to modify the hole tolerances so its easier to print the overhangs, but will no longer be able to pressure fit the magnet in Had to thicken the walls a bit to fit the bigger…

Order a print of this model

Printables

Magnetic Hotswap Adapter

Magnetic hotswapping adapter: This adapter allows for quick swapping of the pens during multicolor prints. It uses 20mm 11mm 2.5mm Neodym magnets. Insert them after the print with double sided tape.

Order a print of this model

Printables

Ergonomic Magnetic Paint Handle

This is designed to have an 8mm x 4mm round magnet inserted in the center. This handle should feel like the new Citadel painting handle for small models, however I designed it to work with bigger hands. This handle will work great with…

Order a print of this model

Printables

Magnetic Box

165mm x 65mm Magnetic Box It needs 8 - 5x3mm magnets

Order a print of this model

Printables

Single Load Block for Angled Talon Magwell for Kirin

Converts the Kirin angled talon magwell (from Shellington Labs) to be single dart loading. In prep for a no-mag event, I found I didn't have any old-school blasters at the right FPS. There's a single load mag block for the SLAB and that…

Order a print of this model

Printables

Magnetic Latch for Ikea's Besta doors

I am trying to create a dry box within an Ikea closet. Apart from a way to remove moisture, I needed to seal the edges. However the seal kept the door open. Since my closet dry box is experimental, I did not want to commit on an…

Order a print of this model

Printables

Magnetic Spool Rollers/Holder - RatRig Style

The original model needs some tolerance prints to figure out the correct scale % so the bearing holders snap together. You may also want to do a tolerance print for the magnets. There are lots of tutorials on how to do this. Otherwise,…

Order a print of this model

Printables

Magnetic snap sunglasses case for phone wallet xperia 10 iv

Case for magnetic sunglasses from owndays snap series, with elastic band slot, fits over a sony xperia 10 iv wallet, Requires: 4 * m2x16 bolt 4 * m2 nuts felt/soft material to line case 150mm * 20mm elastic loop (I used 300 mm * 20mm and…

Order a print of this model

Printables

ONE PIECE - "To Be Continued" Fridge Magnet

“To Be Continued” Magnet - One Piece This 3D-printed magnet features the famous “To Be Continued” text from One Piece, perfect for fans looking to add a subtle touch of their favorite anime to everyday life. The model is designed to fit…

Order a print of this model

Printables

Magic Puzzle Box

I have created a very simple puzzle box that can be assembled within 10 minutes. I am attaching the original STL file and also 3MF and G-Code. Size of the box: 6 x 6 cm Pieces: 7

Order a print of this model

Printables

Mag lever

Orginal lever was too short for my liking so this one is longer

Order a print of this model

Printables

Friction Fit Anderson Window Contact Sensor Magnet Holder

Depending on your windows and printing tolerances, you may print in ASA or PETG if the holder fits snugly. I printed in TPU with the flexible wing version and they fit securely, without any glue, and are easy to remove.

Order a print of this model

Printables

Ring Indoor Camera Magnetic Mount

This is a magnetic mount to allow easy repositioning of a Ring Indoor camera, uses two 8 x 25 x 2mm magnets. I've included a Fusion 360 file so if you want different magnets it is easy to do, if the new magnets are rectangular just change…

Order a print of this model

Printables

STRECHR.SPL - Magnetic Split Ball Stretcher

KDxGP STRECHR.SPL Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! STRECHR.SPL comes in two different heights: 15mm and…

Order a print of this model

Printables

Blackmagic 19" Mini Converter Rackmount

Rackmount for up to 16 Blackmagic Mini Converters. The set consists of 4 parts that can be screwed together.

Order a print of this model

Printables

Realistic octopus with longer magnetic arms

I really love the look of the realistic octopus head by Stanos , but I wanted the nice articulated arms like those from McGybeer 's octopus. While looking around, I realized I could combine everything and even add longer arms. Since I…

Order a print of this model

Printables

AG (Atarashi Gakko) Magnet

I'm just a big fan of AG! Also, this model uses 30mm by 1mm magnets

Order a print of this model

Printables

Gyoto Magnetic Knife Holder With Edge Guard

UPDATE: 3-1-2026: Added Edge Guard and drill guide stls and photos. Got this knife for my girlfriend for her bday and wanted to do something to make it easy to store and also look interesting. This is the knife if anyone is interested:…

Order a print of this model

Printables

Magnetic DNA / RNA Tiles

Explore the Building Blocks of Life with Magnetic DNA/RNA Tiles! Unlock the mysteries of genetics with this innovative set of magnetic DNA and RNA tiles. Designed for educators, students, and science enthusiasts, these colorful tiles…

Order a print of this model

Printables

Magnet Attractor

This housing holds sets of magnets in positions that generate an equilibrium of forces where the magnets remain close, but do not touch. The 6 holes at 60 degree separation holds four 6 mm diameter, 2 mm thick rare-earth magnets. The…

Order a print of this model

Printables

Gear and AR556 magazine pouches with and without belt clip.

Fits common P-Mag AR / 5.56 / .223 magazines and who knows what else. These can attach to a belt, screw to a wall or cabinet, belt attachments, paddles and misc. My modern P-mag's fit “just right” and the last 5mm insert locks them in. My…

Order a print of this model

Printables

Print In Place Deployable Magsafe Docking Station

AnkerMag Go and Apple MagSafe Currently Supported This is a print in place stand based on my recent designs , the purpose of this version is a travel friendly version. Print Profile I recommend using ABS,PETG or ASA, PLA can deform from…

Order a print of this model

Printables

DELTA Q w magnetic joint and more

Taking the thing http://www.thingiverse.com/thing:351236 , I made some improvements, as magnetic joint, spool holder, endstop switches, carriages with 608zz, effector with autoleveling sensor and power plate with switch and fuse. All was…

Order a print of this model

Printables

Magnetic Remembrance Poppy

I always want to wear a poppy for Remembrance Day but always wind up poked by the straight pin versions or end up having them fall off. Last year I lost the backing off the flag pin that I had used to replace the straight pin for a few…

Order a print of this model

Printables

Adjustable stand - With Magsafe or stand

This is a arm for a Magsafe charger or a stand which can be moved and held in a wide variety of positions. It can be mounted right side up or upside down. The clamp is 50mm so should be able to mount to most furniture -When changing the…

Order a print of this model

Printables

MagSafe Charger Stand

Stand to hold the Apple Original MagSafe Charger. There is a hole to eject the charger from the stand. 8 mm bumper pads can be glued into the four grooves to make the stand slip-resistant.

Order a print of this model

Printables

CZ Magazine holster bolt on. 9MM

Good day, I'm CMG and design all types of 3D parts to print. Here is a free 9mm magazine holster

Order a print of this model

Printables

Magnetschlüssel Ersatz / Magenetic Key Replacement

--- English version below --- Das Gehäuse eines der Magnetschlüssel für die Schubladen-Kindersicherung ist auseinandergebrochen. Daher habe ich einen simplen Ersatz für den inneren Magneten erstellt. Passt für einen Rundmagneten D 20mm /…

Order a print of this model

Printables

Soldering aid - clamp with simple internal magnetic base

I really wanted to make this work without the TPU base as i dont have TPU. And I only plan to use this on a metal sheet instead of its family of tools. So made this simple remix in tinkercad. The updated base has a 11mmx2.2mm hole inside…

Order a print of this model

Printables

Wage War Logo Magnet

Decided to make a fridge magnet for one of my favorite bands There are 2 cavities in the model for 15x3mm magnets. All you have to do is put a pause in while slicing the model.

Order a print of this model

Printables

Expandable 3 sloped hexagon parts tray with sockets for magnets

Just a smaller version of the original design. My work table is too small for the original design.

Order a print of this model

Printables

Customizable Fanatec DD MagSafe Phone Dash Mount

This is a customizable variant of my Magnetic Phone Mount for the Fanatec DD1/DD2 sim racing wheel bases for wireless chargers such as Apple MagSafe adapters or any other round Qi wireless charger that is designed similarly. What you…

Order a print of this model

Printables

Card stand for magnetic holder - engraving not included

These i printed for these magnetic hard cases i have, no idea if they're universal, i dont collect cards usually. The cases i have measure around 7mm in thickness and 73mm in length, hopefully this helps to know if it'll fit your holders

Order a print of this model

Printables

Magnetic Case for Apple TV Remote - Model A2540 (8x3 Magnet)

Changed magnet size to 8x3 because that's what I had.

Order a print of this model

Printables

wheel for Magic remote control LG MR18/20

Print vertically, monolit, with supports.

Order a print of this model

Printables

Micro travel case with magnetic lid (Print in place)

I needed a small case to carry my earplugs so I designed this box. But it can be used to store all kinds of small items that need protection. It requires 2 cylindrical magnets with a diameter of 3mm and a height of 2mm. It is a print in…

Order a print of this model

Printables

folding ruler 3m magnetic hinges

A foldinge ruler 3m (extended edition) to measure furniture, rooms or makes. This model provides insets for 10x2.5mm round magnets as hinges and 6x2mm magnets for stability and snap into position. They all should be aligned in the same…

Order a print of this model

Printables

Magsafe Cahrging Ball Desk

The Magsafe Charging Ball is perfect to keep your desk in style and your phone charged ! Made for easy printing with no need of support, it is pretty compact and useful.

Order a print of this model

Printables

magsafe charger V2

a magsafe charging dock, i printed it in pla and the charger is the common round wireless charger found on ali express link for the charger I used: https://a.aliexpress.com/_onyjXzM Recommend tree support I've included several versions…

Order a print of this model

Printables

Magnetic Stud Finder

I lost my CH Hansen magnetic stud finder so I made this. I used a total of 4 20x10x3mm magnets and inserted them into the print with a pause in the gcode. This stud finder also features a window so that you can mark a center line. EDIT: I…

Order a print of this model

Printables

Gridfinity Holder for Magigoo 3D Printing Adhesive

Printed in PLA, didn't use supports.

Order a print of this model

Printables

Magsafe Paw Charger Dock

Paw print magsafe dock. The Paw is held onto the stand like a peg hook. I printed the paw with 5% infill, and the stand was printed on default settings

Order a print of this model

Printables

Wire Mount Magnetic

This model allows you to organize your cables with 10x3mm magnets instead of screwing into your walls. Insert the magnet into the base and run the cables as you normally would. I also included the F3D file so you can change the size to…

Order a print of this model

Printables

KV4P Backplate and Magsafe Backplate

A basic backplate and a magsafe backplate for the KV4P project (https://kv4p.com/). Use a magsafe sticker like https://www.amazon.com/gp/product/B09DFB9733 for the magsafe backplate.

Order a print of this model

Printables

Koala Magnet

This is a Koala Magnet which takes 2 neodymium 6mm x 3mm magnets pressed into the back. Printed at .2mm Layer Height, 2 wall loops, Grid infill pattern at 15%. No support, raft or brim required. I used silk silver and glow in the dark…

Order a print of this model

Printables

Sophia Wildstar Magic Necklace

Order a print of this model

Printables

Bento Box - Pins instead of Magnets

Dont have magnets (yet)? Use those pins to connect the bento boxes. Print with precise wall 20mm layer height more elephant correction (ca 0.25mm)

Order a print of this model

Printables

Simagic Alpha PSU 8020 mount

M8 mounting hole Standard printing profile - 2 walls, 15% infill, etc No supports/brims needed

Order a print of this model

Printables

Fox Magnet

Includes pause to be able to insert the 8x3 magnets.

Order a print of this model

Printables

Platypus Magnet

Includes pause to be able to insert the 8x3 magnets.

Order a print of this model

Printables

[Lorcana / Magic] Boite de stockage / Séparateur

/!\ Attention ! (English below) Non testé / Non imprimer Non compatible avec mes boites de rangement Yu-Gi-Oh! Boite + Séparateur pour rangement de carte Lorcana / Magic. Le rangement est prévu pour des cartes : 6.35 x 8.89cm le modèle…

Order a print of this model

Printables

Magnetic Puck Screen Holder

Store your 58mm puck screens with this magnetic holder. Uses 10mm x 3mm magnets ato hold on to your coffee machine.

Order a print of this model

Printables

GEN2 185 Decor Gridfinity Magnetic Drawer

JERRARI3D.com The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System . You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to…

Order a print of this model

Printables

Magsafe Stand

/!\ This was a proof of concept, the design is not optimal, the functionnality is "bancal" as we say in french. Please don't print it, I let it as an archive, but don't waste your time and PLA. /!\ This is a small and probably not very…

Order a print of this model

Printables

Drywall Magnet Mount

I used this to hold a swinging frame to the wall. I glued an 8-mm neodymium magnet in the back side and screwed it into a drilled hole in the drywall.

Order a print of this model

Printables

Connetix Magnetic Tile - Mario Warp Pipes

This is a warp pipe made for Connetix magnetic tiles with an open hole for figurines to go through. There is an option for 1x1 squares and 2x2 squares for larger figurines. The magnets I used are pictured from Bunnings Australia but I…

Order a print of this model

Printables

Connetix Magnetic Tile - Blank for Remixing

There are two tiles, 1x1 and 2x2 compatible with Connetix tiles. Of course it's way better and cheaper to go buy the actual tiles than print basic squares but I have uploaded the bases I used to make my Mario Warp Pipe for figurines in…

Order a print of this model