1 / 5
Logitech Racing Wheel Shifter Magnets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shifter magnet add-on for your Logitech racing wheel.
- Rating
- 5 / 5
- Likes
- 74
- Downloads
- 472
- Makes
- 8
- Views
- 3,341
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Shifter magnet add-on for your Logitech racing wheel. I tested this on a G27, but it should fit any of the newer Logitech wheels.
Files:
Logitech Shifter Magnets: Standard version that fits a thin M3 square nut with 1.8mm thickness.
Logitech Shifter Magnets Thicker Nut: Same as standard version, but can fit a thicker 2.5mm M3 square nut.
Required Hardware:
(4) 8 x 3mm disk magnets
(2) M3 x 10mm socket cap head screws
(2) M3 square nuts - 1.8mm or 2.5mm thickness
Installation Instructions:
- Use super glue to attach the magnets to the printed pieces. Insert the magnets so that they all have the same polarity direction. Wait for the glue to dry.
- Insert the square nuts into the slots.
- Place the pieces around the steering wheel column. Insert one screw and tighten slightly.
- Insert the other screw and tighten slightly.
- Alternate tightening each screw until both are evenly tight.