Counting matching models…
Multi material shift knob designed for Ford Fiesta ST 6-speed. Intended for printing in multiple colors, Print Settings Printer Brand: Prusa Printer: i3 MK2 MMU Rafts: No Supports: Yes Resolution: 0.10mm Infill: 50% Filament: Hatchbox…
simple design of these VDV paddle shifter designs to fit onto Thrustmaster Sparco button boxes (P310 and R383) reccomend printing with a lot more walls and dense infill to make them as solid as possible, i printed mine with 6 walls and…
This is a model of the shift linkage bushing on the transmission side of a B Series Acura Integra. This should be very accurate but the only part I wasn't 100% sure on was the taper for the dished side of the bushing as I didn't have the…
Its an Shifting Stick for the Seat Ibiza 6J You need an M4 Thread drill and 4x M4 Screws with a length of 10-70mm (DIN912)
El modelo necesita 4 tornillos de M3.5 y corona de 7mm. Está hecho para que no tengas que usar soportes. Sus dimensiones son 120x80x69mm.
The Gearshift Fidget is the perfect fidget for all car lovers! But it's also perfect for everyone else, because it's simply great fun to use. The aim is to move the gearshift lever through the various positions. It is designed so that you…
Biete hier das 3d Modell einer Original Golf 4 R32 Schaltwippe an. Offering here the 3D model of an original Golf 4 R32 shift paddle.
6X3X2.5 mm bearing X4 Wire diameter 1.2mm, inner diameter 10mm, length 12mm Spring X1 Hose clamp X1 insert molding nut M3 5mm X3 M3 screw 10mm X3 zip tie 150mm X2
As I'm switching from end bar shifting on a U bar to flat bar shifting on a T bar on my recumbent, I designed this to still use my Shimano SL-BS79. Symmetrical. No need to disassemble the levers to adjust position. Should work also on…
I recreated these shifters using photos and datasheets provided by Cosworth. They originally are part of the entire CCW MK3 wheel design, but as that won't be finished for some time, I decided to release them as a standalone design so…
Held on a playseat challenge thanks to this design: https://www.printables.com/model/302265-playseat-challenge-shifter-holder-shortened-attach The controller board and wires…
Print settings: nozzle: 0.4mm layer hight: 0.2mm supports: none Adapter: infill: 20% infill pattern: Adaptive Cubic perimeters: 2 brim: optional (I didn't use it) Knobs: infill: 20% infill pattern: Adaptive Cubic perimeters: 2 P.S. For me…
A replacement for the Logitech shifter inspired by those irl katana shifters, a little scuffed since it's my first upload I used PETG and put regular supports under the hilt, which is what it's called. The supports came off as the shifter…
I used TPU in TH3 for the legs, PETG in TH2 for the supports, PLA in TH1, TH4, and TH5. This took about 17 hours and over 2000 TH changes I should have dried the TPU for another 24 hours
The head of my gear shift broke, so I needed an appropriate replacement. We all are fans of Dummy 13, are we not? So, why shouldn't I use the iconic head of Dummy 13? The eye area indicates the gear placement. printed in PETG, 0,2mm layers
Update 25.8 Added a version separated into 3 parts to prevent the stick from breaking. V2 – with "R" gear and new design. Available with keychain holes. Fully print-in-place – no assembly required. Tip: When removing the plate from the…
I needed a replacement bar clamp for my SRAM flat bar shifter, and wasn't happy with how much flex I was getting with a printed one. This replaces the standard bar clamp with one that mounts to both holes in the SRAM shifter, allowing for…
Gear selector lever for bicycles. The smaller diameter of the clamp is 36 mm. The bigger diameter is 40 mm. The clamp mechanism itself is 14 mm wide. For assembly you will need a screw and nut size M5. Print Settings Material: PLA Infill:…
Tighten up your shifter even more than what you can get from just the shifter base bushings alone. Not many have dabbed into shifter cable bushings for this car. For other manual cars, many performance shops do this as soon as the new car…
Same as this paid tool: https://www.ebike24.com/enviolo-shift-cable-gauge Painted 3MF file included for Bambu Studio Used on a Tern GSD
I didn't have a screw driver long enough to attempt to use the same fastener that's on the shifter already, but it is a good enough friction fit where the concern for the knob coming off is minimal. Slight sanding needed to allow for a…
I made ball shape gear shifter that fits well in average hand, and is directly mountable on TH8S shifter.
This shift dial helps correctly position the idler pulley assembly. On some ACE Pro units, a small tolerance issue can cause the idler pulley to sit at a slightly incorrect angle, leading to repeated Error 11518 (filament clogging). A…
3D scan of the top cover for the paddle shifter mechanism in the 599xx rim. Should be the same part in most TM rims with the older paddle shifter mechanism. The axle part of the mechanism is available on printables (and other sites) from…
I originally made this to be machined (which I did), but I also printed copies of it to validate the design. The threads worked perfectly on the version I printed on my H2S. Print with high-infill to give it a more solid feel.
Logitech RS shifter bracket for Playseat Challenge
Goodbye 2025, Hello 2026 | Time Has No Mercy
The original version does not include any front damping. This version is heavily modified compared to the original, as the bike height has been raised by 3 cm, allowing the creation of a front support. With this change, the effect of the…
Magnetic paddle shifters in a form factor of a kitcard . Required hardware listed below: WK812 Limit switch M3 bolts and nuts (M3x18 or M3x20) M5 bolts and nuts to assemble the paddle (M5x40) 625ZZ bearings Bearing washers Magnets (15 mm…
Two versions available. Large single print or 2 pieces interlocking dovetail for smaller print bed sizes. -No supports needed. Use at least 4 walls & 8 bottom/top layers for strength. 4 mounting holes with countersunk nuts (M6) metric…
This works flawlesly. you need just 2 pieces of D30mm x 10mm rubber https://www.kaufland.cz/product/435437096/?kwd=&sour
StackShift is a skill-based stacking puzzle game where players carefully place colorful shapes to build upward without losing balance. One wrong move can bring everything down. Stay focused, stack smart, and see how high you can rise.
For increased durability, print the part in a horizontal orientation. Longer bolt is required for the installation
Designed this to angle my Aliexpress sequential shifter at 10 degrees and raise it above my other shifter. It also has mounting holes for a bass shaker, and it is incredibly sturdy. I have included the fusion file if you would like to…
Replacement shift key for the Olivetti Lettera 22 typewriter. Designed to match the original dimensions and mounting system. Ideal for restoring machines with broken, cracked, or missing shift keys. Print settings: Material: PLA or PETG…
Ergonomic gear shift knob designed for manual transmissions. The shape is compact and comfortable, with a textured grip for better control while shifting. The knob is printed in PLA and TPU, combining a solid core with a grippy outer…
for printing, flip upside down and add supports in the top. not jeep tested and may need a few prototypes before getting correct size
This is a slide- on mod for the Aliexpress H pattern shifters, it blocks it from going into 7th gear, or both 6 and 7. You simply place it down on top of your shifter and it should hold itself in place well! The IPT file is also included…
Zalecany druk 100% pełny , ja tak zrobiłem , jest otwór pod gwint m12 głęboki na 55mm , w moim aucie jest m12x1.25 Materiał minimum Petg z racji temp w aucie w lato Wymiary : długość-65mm szerokość-43mm otwór-11x55mm
Remix of popular fidget made for Heat board game Printing: PETG 3 walls, 4 top and bottom layers, 15% infill Be careful with the main part, spring can be damaged if you force it of the plate when it's done For main part, do a colour…
for the people who can't shift or understand how gears work!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The pastic collar that engages with the reverse lockout cable in a mk2 Ford Sierra 4x4.
Originally designed for CfMoto 450NK, but I have included a Fusion360 and STEP file so you can change the dimensions to fit your motorcycle. Printed in TPU
Streamdeckplus holder at shifter for Fanatec GT Cockpit
An adapter for use with the MAN TGX shifter, specifically designed for the Bash Pro sim shifter but works with any M8 threaded bar. Printed in TPU for a little flexibility (sizing based on a small amount of shrinkage) this will be a snug…
Replacement bushing for the IB5 manual transmission, used in various Ford models such as: Focus, Fiesta, Fusion, C-Max, etc. Designed as a direct replacement for the gear shift selector bushing, which commonly breaks over time and causes…
A replacement gear shift rubber for the Suzuki DL650 V-strom. It is slightly longer than the to suzuki original part to cover the, potentially sharp, metal end of the shifting pedal. Printed in prusament tpu95a with 1.2mm walls and 17%…
A dovetailed 4080 mount for the SHH Newt sim racing shifter which allows it to be quickly swapped out for my DIY 3D printed sequential shifter. Printed with PLA, 4 walls, 15% infill. The shoulders of the 4080 mounting holes are printed…
Control box with 8 buttons, paddle shifters, rev light/shift light and 7 segments display. To be used with 13" / 320-330mm Steering wheels with 70mm bolt pattern like MOMO, OMP, Aliexpress etc.. Can be used with contact plate inside the…
I bought a fanatec universal hub V2 and was not happy with the shifter panels. Their arrangement regarding to the wheel (I have quite a large one with some distance to the hub) felt off. So I made new shifter panels and included counter…
Note: after using it a while I decided it needed a bit more resistance when shifting and just stuck another magnet on the magnets in the cups. Flash the Arduino following the instructions provided by SimHub. SimHub Arduino setup -…
Retaining Clip and sleeve for my 01 Jeep Grand Cherokee Transfer Case. Swapped from a 247 to a 242 HD transfer Case. Clip fits both at the transfer case and the shifter itself. Designed to retain the shifting cable for the transfer case.…
These fasteners are suitable for Renault Clio 3 Phase 2 frames (82 00 393 246). They break quite easily, and a plastic frame costs €15-20. Rather than replacing the whole thing, you can now replace just the fragile parts. For a good bond,…
You must use the old metal housing. Printed in FLEX and glued inside. OEM: 25111222015 Strongflex: 031933 Should fit: BMW 1 E81 E82 E87 E88 BMW 1 F20 F21 BMW 2 F22 F23 BMW 2 M2 F87 BMW 3 E36 BMW 3 E46 BMW 3 E90 E91 E92 E93 BMW 3 F30 F31…
Shifter paddles for the excellent AMG GT3 steering wheel project by Turn Racing https://www.printables.com/model/337686-turn-amg-gt3-diy-sim-racing-wheel This includes the Up and Down text as a two colour print. There are also single…
I couldn't find a shifter console insert that I quite liked so I made one meself. This one will have to do. I put some vintage Toyota writing on it from the public domain. If I can improve it with some molle holes or lasers or something…
This is a remix of the Easy Custom EMS Mounts sized for the Vector3D RainbowShift Board to be mounted using FT EMS.
In the early model A1, A2 and A3 platform VW Rabbit, Scirocco, Jetta, Convertible and Pickup/Caddy models with the 020 transaxle, adding weight to the longer sift rod can help improve shifting feel. In fact, so much so, that in the A3…
Magnetic Shifter Mod This model is a magnetic shifter mod for the MOZA Racing ESX Steering Wheel. The mod will improve your shifting feel. It will feel shorter, more direct, and more aggressive. You can print it without any special…
A coat rack made of two broom sticks, a random curtain rod, and some PLA. Materials Two Broom Sticks approximately 3cm in Diameter A bar that is 2.2 cm in Diameter PLA or other stiff filament Printing If you want better support and…
Uses basic imperial screws, if I get enough downloads, I'll make a metric version. When slicing, be aware that there are nuts that should be paused and placed in the model. Expect different style of nobs in the future. This is also tested…
Shift bezel for a 1979-1980 manual RX-7. You will need a new shifter boot that is of sufficient size for this. I made my own and can upload the templates a bit later once I finish tweaking them. To assemble you will need 12 M3 heat press…
The Next Level Racing GTLite Junior does not include a shifter mount, and Next Level Racing does not sell any accessories to attach a shifter to this cockpit, so I decided to make one for my kids sim rig. The 2 upper clamps may be a tight…
VW Up shifter boot trim. Dimensions arent exactly precise but it fits.
This is a moutning plate for the Logitech shifter and a generic sim handbrake on a GT Lite foldable seat. Here are the print specs I used: PLA+ 200C 40% infill All walls 2.5mm (VERY IMPORTANT) I use UltiMaker for the modelling and print…
Nice mount for attaching your Logitech RS H shifter to 4080 aluminum extrusion.
Remix of already created model which works great. Reason I created this was because these shifter cables are often cheaper and easier to buy (atleast where I'm from). Print it flat and with around 80% infill. Dont use supports, overhang…
Generate a male threaded rod with inner female threading. Includes options for a flared base and a chamfered tip. Able to configure diameter, thread pitch, total length, and thread tuning options for printability. Model is generated using…
Another take on my shift knob with a separate printable middle insert. allows for the part of the shifter in contact with metal to be printed in a higher temp filament.
Falcon2 Pro Collection This is a fix to ensure the drawer does not shift. Why is this important? If you're wanting to work from the 0 X and 0 Y coordinates with a secured honeycome in the lower left corner, this will help ensure…
Universal D-SHIFT motor mount . Designed primarily for robots and other DIY projects . I recommend printing with a 0.4mm nozzle at a layer height of 0.2mm . It can handle SPEED printing. For good structural strength, I recommend PET-G .…
The Golf's Gearshifter was defect, because the gearshift inner guide was defect. To get the car running again, at least temporarily, I redesigned the gearshift guide. The challenge with replacing it is that the entire assembly can only be…
There was no mount for a PXN SF U Shifter to a Logitech Challenge X and the existing one for the Moza shifter has been done in crappy STL format which is totally against the community-centered 3D-printing idea, so I remade everything from…
Robust mount with a shorter cantilever for higher strength and stiffness
Bring a real racing feel to Heat: Pedal to the Metal with this custom gear shift accessory. Designed to add immersion and table presence, it turns every gear change into a satisfying moment and makes your dashboard setup look even more…
Helps children change gear easier. Secured with three stainless steel M3 bolts and heat set threaded inserts. Feel free to use the included FreeCad model to change to any other type of fastenings. Printed with the "lid" flipped with the…
This is an original design for a 2 color presence token for the Spirit Island spirit Shifting Memory of Ages . Together with the reminder tokens , you can print a set of 13 presence token, 3 defend tokens, and 3 isolate tokens as…
You need one insert, 6 wide switch brackets (black and purple in the photo), and 2 narrow switch brackets (yellow in the photo). Parts: (8) Omron SS-5GL2 snap switches Arduino Nano ESP32 (18) M3x8 socket cap screws (18) M3 heat set…
This is an alternative trigger shifter lever for a Frog 48 bike. It seems the trigger is a Shimano Alivio. Installation: Remove old lever. I used a knife. Attach the new lever to the metal lever through the hole with a cable tie.…
The shifters are easy to build, work well and have a nice feel Assembly is quite simple and straightforward Magnets are pressfit inte the printed parts Screws go directly into the printed part except for the mounting were brass inserts…
All the adapters i found did not fit the shifter, So i made my own. This one is tight tolerance, May need to adjust the hole diameters for yourself. My shifter shaft is 7mmx9mm shaved circle with screw hole on top. The Shifter i made this…
I added a hole to the right part of the holder, so I can push some cables through it
Shift knob to mirror the atlas transfer case from advanced adapters. It has the standard M10x1.5 thread pitch and will fit Jeep, Honda, and others. Works well with PLA, ABS, and PETG. I recommend PETG or ABS for heat resistance and will…
centered the gates better for my shifter, does require you to file the usb slot on the back to fit
This enclosure is designed to house the Logitech G29 mainboard and provide clean, protected access to the pedal and shifter connections. It offers a compact and organized solution for projects where the original wheel housing is not used,…
Custom-fit reflective inserts for Redshift Arclight Pro pedals, offering a low-maintenance, no-charge alternative that’s also less likely to be targeted by thieves. 🧰 Materials (per reflector) 2x neodymium magnets (Ø 8 mm × 3 mm, with…
![TP-Link TL-SG116[P] Switch 19" Rackmount (shifted center) remix with hole](https://media.printables.com/media/prints/fd2a13e1-392e-4bf4-87b7-c478b1b7422f/images/12700396_673da28b-48e7-4570-95c2-6345e62b89a9_c0aab716-a0ab-499c-b6b0-b0ff3767fb96/img_7462-kopie.jpeg)
