1 / 3
Playseat Challenge X PXN SF U Shifter Mount + STEP Files — image 1
1 / 3

Playseat Challenge X PXN SF U Shifter Mount + STEP Files

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

WHY ARE PEOPLE USING CRAPPY STLs? Redid everything in decent format (STEP), mirrored for LHD, mounting for PXN SF U

Rating
0 / 5
Likes
2
Downloads
27
Makes
0
Views
225
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Noncommercial — Share Alike

There was no mount for a PXN SF U Shifter to a Logitech Challenge X and the existing one for the Moza shifter has been done in crappy STL format which is totally against the community-centered 3D-printing idea, so I remade everything from scratch. 

Use something tough/impact resistant with good layer adhesion like PC/PA/PCTG/PET-GF/ASA. PLA will eventually snap. 

There is a version with heat inserts and M5 nuts to choose from.

You can simply edit the provided STEP files in case you want to adjust anything (how nice not having to deal with trash formats like STL).

BOM:

  • 4x M5x30 screws (clamping bracket)

  • 4x M5x9.5 heat inserts (holder to clamping bracket)

  • or 4x M5 nut (holder to clamping bracket)

  • 1x M8x25 - M8x30 screw (reinforcement bar)

  • 2x M6x40 screws (shifter to reinforcement bar)

  • 2x M6 selflocking nut (shifter to reinforcement bar)

To mount the shifter use either M5:

  • 4x M5x12 - M5x15 screws (shifter) 

  • 4x M5 washer (shifter) 

or use M6:

  • 2x M6x15 screws (shifter)

  • 2x M6 washer (shifter)

  • 2x M6 selflocking nut (shifter)

Printing: 

  • 3+ Walls minimum

  • 30%+ infill minimum

  • Gyroid/TPMS-D infill

  • Print clamping bracket upright

Tags