SHH Newt Shifter Mount V3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A dovetailed 4080 mount for the SHH Newt sim racing shifter. I have a sequential shifter that uses this mount.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A dovetailed 4080 mount for the SHH Newt sim racing shifter which allows it to be quickly swapped out for my DIY 3D printed sequential shifter.
Printed with PLA, 4 walls, 15% infill. The shoulders of the 4080 mounting holes are printed solid so I could bear down on the screws without crushing the part. I included the modifier used to make them solid. While you can do it manually in the slicer, it's much easier to create the modifier in CAD.
The plate looks a bit rough as I had a little over extrusion in that print. Just two quick passes over a sheet of medium grit sandpaper to knock down the high spots. I was too lazy to hit it with the heat gun to make it pretty again. Never going to see it except when swapping shifters.
I use this same mount for my sequential shifter.