Rear Right Bottom Magnetic Cable Duct (short version) for PrusaBox by Printer box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Additional cable duct for the right side of the PrusaBox with magnets.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This an additional cable duct for the right side (short version) of the PrusaBox, which I needed, because I have a second raspberry on the outside of the Prusa Box and a lot of cables from my fire suppression system going in.
Important!
This cable duct will only fit if you use the big corner cover:
https://www.printables.com/de/model/214775-right-rear-bottom-corner-cover-prusa-box-by-printe
If you want to install the [1.] small corner cover you'll need the [2.] long version of this cable duct.
[ 1. ] https://www.printables.com/de/model/215263-corner-cover-for-prusabox-by-printerbox-small-vers
[ 2.] https://www.printables.com/de/model/215278-long-right-bottom-magnetic-cable-duct-for-prusabox
You will need:
Four 8x4 or 8x3 magnets (fix them with superglue, if necessary)
Print with support. See picture: