Rear Right Bottom Magnetic Cable Duct (short version) for PrusaBox by Printer box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional cable duct for the right side of the PrusaBox with magnets.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This an additional cable duct for the right side (short version) of the PrusaBox, which I needed, because I have a second raspberry on the outside of the Prusa Box and a lot of cables from my fire suppression system going in.
Important!
This cable duct will only fit if you use the big corner cover:
https://www.printables.com/de/model/214775-right-rear-bottom-corner-cover-prusa-box-by-printe
If you want to install the [1.] small corner cover you'll need the [2.] long version of this cable duct.
[ 1. ] https://www.printables.com/de/model/215263-corner-cover-for-prusabox-by-printerbox-small-vers
[ 2.] https://www.printables.com/de/model/215278-long-right-bottom-magnetic-cable-duct-for-prusabox
You will need:
Four 8x4 or 8x3 magnets (fix them with superglue, if necessary)
Print with support. See picture: