Glock mag pouch
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.70 – €3.30 net (excluding VAT)
For file: glock mag pouch v1_0.2mm_PETG_MINI_3h14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.00 excluding VAT (range midpoint).
- Weight reported by the author
- 35 g
- Print time reported by the author
- 3.24 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A magazine pouch for 9mm glock mags. Has a retention latch to keep the mag in place.
- Rating
- 5 / 5
- Likes
- 115
- Downloads
- 772
- Makes
- 3
- Views
- 5,062
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print in PETG.
This is intended for range use. I would not trust my mags with it in the field.
It's made for printing standing. I would recommend three or four perimeters.
For the retention latch you should use supports, but I find it works well with 0.2 mm contact z distance and zero interface layers. The result should be pretty good and with supports that pop right off.