Cat Flap Mosquito Screen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cat door for your mosquito screen door.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 149
- Wydruki
- 1
- Wyświetlenia
- 1030
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This cat flap fits to your mosquito screen door.
External Hardware
- 24pc - M3 x 12 mm Counter Sunk Screw
- 24pc - M3 x 6mm Brass Heat inserts
Installation
 Add the brass heat inserts to the bottom frame |
 by putting some Superglue to the outside channel on the bottom frame, glue it to your mosquitto screen. The glue provides also an extra layer of security. Add glue only to the outside channel and make sure you won't get the glue somewhere else, otherwise you may not be able to provide enough clamping pressure when screwing the top frame anymore. |
 Screw on the top frame. Make sure it is really tight! |
 Cut the remaining screen in the inside. |
 make sure you free the link from the screen |
 cut the cutout screen to size and glue it to one half of the flap |
 Glue the two flap halfes together and install it with the two doorholder parts. |
 |