1 / 7
Hotend Fan Duct for Modix Big 60 with Mosquito Magnum+ — zdjęcie 1
1 / 7

Hotend Fan Duct for Modix Big 60 with Mosquito Magnum+

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an improved fan duct with shroud for the Modix Big 60 (& 120) printer, with the Hart Smart Products "Premium…

Ocena
5 / 5
Polubienia
4
Pobrania
144
Wydruki
1
Wyświetlenia
979
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is an improved fan duct with shroud for the Modix Big 60 (& 120) printer, with the Hart Smart Products "Premium Printhead", which consists of a Bondtech BMG-M extruder and Slice Engineering Mosquito Magnum+ hotend.

Exceptional improvement in air flow speed (172%!) and volume, as well as directs air downward 35-degrees. The difference is immediately visible on test prints.

The design is based on the function of the Prusa MK3S fan duct.

NOTE: Print this duct in the material with the highest melting temperature possible (e.g. ABS > PETG > PLA).

NOTE: Make sure the fan duct is not touching the hotend after installation. There is some tolerance in the fan mounting bracket slots, and it is possible to install it incorrectly with the duct touching.

Hart Smart Products - Premium Printhead: https://hartsmartproducts.com/collections/3d-printer-parts/products/modix-premium-printhead-upgrade

Bondtech BMG-M: https://www.bondtech.se/product/bmg-m-extruder/ Prusa MK3S+ Fan Duct: https://www.printables.com/model/57217-i3-mk3s-printable-parts

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.30mm

Infill:

90%

Filament: eSUN PETG Black


Notes:

Snap-off support is modeled in. No additional supports needed.

Category: 3D Printer Parts

Tagi