1 / 3
Voron AfterBurner Mosquito Magnum+ — zdjęcie 1
1 / 3

Voron AfterBurner Mosquito Magnum+

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for magnum+ with extra room for cables and accommodates larger heat sink

Ocena
5 / 5
Polubienia
19
Pobrania
200
Wydruki
1
Wyświetlenia
2667
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I made this remix because the original did not have enough room for the larger heat sink of the magnum+, and cable management was almost impossible.

I made the heat sink fit and created extra room for cables.

I made a block to be able to lower the z-probe. It will hopefully fit other sensors than mine. Fit the block on the sensor and screw down the block on the x-carriage.

if you want to change the hotend to a “regular” size, then just remove the block and connect the sensor in the standard way.

Tagi