Dragon Burner V7 Hot End Mount For Slice Mosquito
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hot End Mount For Slice Mosquito to work with the Dragon Burner Toolhead project by chirpy2605.
- Ocena
- 4,5 / 5
- Polubienia
- 29
- Pobrania
- 242
- Wydruki
- 3
- Wyświetlenia
- 2646
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a simple Mount that works with the Slice Engineering Mosquito in the Dragon Burner V7 Toolhead Found on Github: https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner.
The Dragon Burner is a toolhead for the v0.2 Voron printer. It will also work on the various Printers for Ants.
Printing:
Use the Voron suggested defaults and print in ABS/ASA or better.
LAYER HEIGHT
Recommended: 0.2mm
EXTRUSION WIDTH
Recommended: Forced 0.4mm
INFILL TYPE
Grid, Gyroid, Honeycomb, Triangle or Cubic
INFILL PERCENTAGE
Recommended: 40%
WALL COUNT
Recommended: 4
SOLID TOP/BOTTOM LAYERS
Recommended: 5
This file can also be tracked at my Fork:
https://github.com/webdevtodayjason/voron/tree/main/V0/Dragon_Burner/STLs/v0.2