RepRack 1kg Spool Holder 20mm Tube V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified RepRack spool holder to suit 20mm pipe and 1kg spools.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Modified version of my original remix, to shorten the height by a significant amount, sunk the bearing of the spool further into the stand, reduced the distance in between bearings for a more snug fit and added some radius to help guide the bearings home.
Print bearing slot facing up (side of stand flat on bed) as pictured.
Print Silenced Frost spool holder found here.
The spool stand consists of a left and right brace and 4x cross braces.
Each cross brace requires 2x M3x5x5 heatset inserts, 8 total.
You will need 8 M3x16mm screws to assemble.
SilencedFrost's Spool Core requires 2x 608 bearings, 2x M3x12mm screws and 2x M3 heatset inserts.
I have included the .STEP files as well as the .STL files