265 modeli
Update 6. Aug. 2023 The STL ist about an 1cm larger than what you see on the Lavazza photo. You can print it a little bit smaller if you want. Especially if you put you coffee bag into a Kellog's tin can as shown in the background. Update…
You will need bearings. for 2kg three 608 for 1kg two 608 for 250g two 696 Among the STL files are auxiliary bearings - before you get the necessary pieces :-)
Update 2023.11.18: I've added a Fusion 360 paramaterized model of the side walls, so everyone can mix and match the design to match their specific food dehydrator. It has been only teste for certian combinations, so the model still may…
1kg spool holder 1Kg spool holder large version https://www.buymeacoffee.com/teto121119u
I needed a free-standing spool holder for my X1 Carbon since I don't have room behind it to use the built-in one. Which honestly isn't that great anyway. It also was designed to go (aesthetically) with my filament storage rack Filament…
This is my solution for what to do with old filament spools: Use them to hold all your painting supplies! Holds 12/28 paints. middle insert: This goes in the middle of the spool. It is designed to fit an inner diameter of 53mm and…
There are two versions of the drawers. v1 - For the older sunlu spool (black plastic, 8 small holes for holding filament in place reused for drawer “hinge”) v2 - For the new sunlu spool (blue plastic, 6 small holes for holding filament in…
This is a redesign of the MasterSpool by Richard Horne (aka. RichRap) . Ideal for DasFilament and FishyFilaments . The spool is now fully symmetrical. The spool end can be fixed more easily, and there is a release path for filament…
Mount up to 6.5 cm wide 1 kg spools inside your Centauri Carbon. Print two each of the 5 mm vertical and horizontal spacers for the right-hand wall. You may fit the spool without removing the studs but that will require that the bed is…
its a spool holder
This is a spool holder designed to mount inside the Original Prusa Enclosure. It has a spindle that screws to the main bracket, so that an extension piece (or a longer spindle) can be screwed in when you want to use a 2kg spool. To…
A remix of Twotone74 drybox for the Ikea 365+ with equal rollers and a larger silica box/tray to put even more silica. As in the original model the max diameter of the spool is 200mm. Bill of Material: 8x 608 ballbearings (the one in the…
Creality k1. Suppot bobine de filament avec roulement à bille. (roulement type 608: 8x22x7), pour bobine d'1kg et de 3kg. Creality k1. Filament spool holder with ball bearing. (bearing type 608: 8x22x7),for filament spool 1kg and 3kg…
You need no tools, no screws, no shafts, no threaded rods. The roller can be screwed to the surface on which it stands. The filament rolls easily due to the large rolls. Only 3 parts to print. You need the ball bearings. Two different…
3 von diesen Füßen werden für eine Gasflasche mindestens benötigt. Ich habe sie aus TPU gedruckt. Leider scheinen die Gasflaschen alle leicht unterschiedlich zu sein, deswegen habe ich mir mehrere Sätze ausgedruckt und dabei im Slicer mal…
Fits international 1kg 850ml (30 oz.) cans Ø=99mm H=119m (Ø=102mm max / H=122mm max). The files provided are only for the left side and need to be mirrored in the slicer for the other side. Print settings: Infill=15% gyroid /Layer…
A simple and strong filament shelf. Made to fit 13/16" (~20.5mm) dowels. Mounting holes sized for standard drywall screws. Printing: I used 5 walls for strength and 20% infill. I printed the first set at .2mm but I liked the look (and…
Check Swoosh's print for the full details. For 4L dryboxes: Chef's Path or GoMaihe (they are equivalent).
Print the spool holder and 3 of the spacers. Use M3 threaded inserts to melt into the holes. Use 3 M3x6mm screws with the spacers for the mount points. Screws and spacers are uses instead of one solid piece to allow for longevity of the…
Measure device for Bambulab 1kg filament spool single color Print from bambulab PLA BASIC. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check th multicolor version!
PLA+ Layer 0.2 infill 20% Wall 5 no Support Short Version: 125g ca 4h Endstop super glue it (optional)!! at your own risk :P gift coffee money Bitcoin: bc1qx7lu8wjtka03pcagmqr8ky6nr5wt78u0x5qccu
I recently got a 3kg spool of eSUN PLA+ from Amazon because it was on sale. But the spool seemed to be too large and too heavy to trust the spool holders on the printer, so I decided to build one that I can put next to the printer. Needed…
This is a stacking horizontal spool holder/roller, originally designed for PolyMaker's 3kg spools (120mm wide, 250mm OD, 55mm ID). The parts are broken up with the largest being the tray at 250mm across. A printer with 250mm print area…
Design description All (gridfinity) solder holders were too small for my 1KG spool. Designed this around a spool with a diameter of 70mm and 75mm height. Contains a slot to store the spool end when not in use, to reduce interference with…
This version of the eSUN centring disk holds the spool firmly by mating up with the recessed 53mm hole. Modelled on the original 50mm centring disc, I created a new f3d model to make the re-design easier.
The "axe" part is the same for the 2 supports V1 and V2. La pièce "axe" est la même pour les 2 supports V1 et V2.
I made this model for reference when making a custom filament spool holder, but this could be helpful when designing anything filament related, so I am uploading it here. Almost all dimensions are about as accurate as I could possibly…
Alright I took the existing models and put them onto separate plates. Some of the bases are thicc so they need their own plates. Nothing “needs” a brim and probably prints best without them. I put this all together on my Bambu X1C (Fancy…
Based on Zack Freeman's gridfinity system. Uses M3 x 8 screws for the 3kg spool design, Uses M2 x 6 screws for 1kg spool design. and gridfinity 6x2mm magnets if you choose to use magnets. Uses a 3/4inch or 20mm rod for the middle. Or you…
I needed a spool holder for the Rigid Ink 1kg spools as they have a larger hole (54mm) and wider body (74mm). This spool holder will hold a spool with a body up to 76mm. The Innofil/Ultimaker spools do not fit this holder, but it is as…
Cardboard Adapter for the 1.1 kg Jayo Spools. Fits perfectly on the Cardboard (very tight) and in the AMS. Prints ~ 16 minutes per Adapter. Use Concentric for pattern and infill pattern. Prints much faster.
Summary: This spool holder component is for Prusa MK2, MK3, and MK4 printers. This spool holder is compatible with the default provided injection molded spool holder from Prusa, and matches the same aesthetic. The 1kg version of this…
For a mini-project I was doing, I needed an Inland spool model, but couldn't find one. It seems models of different brand spools are hard to come by, so I'll do my part in remedying the issue. Enjoy!
Measure device for AURAPOL 1kg filament spool MULTIcolor Print from AURAPOL PLA. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check th multicolor version!
PLA+ Layer 0.2 infill 20% Wall 5 no Support Endstop super glue it (optional)!! at your own risk :P gift coffee money Bitcoin: bc1qx7lu8wjtka03pcagmqr8ky6nr5wt78u0x5qccu
Overview This project is a 3D printed filament storage solution designed for easy storage and transport of up to 4 filament spools . The construction is robust, modular, and features an integrated system that allows multiple units to be…
This is a simple but effective drybox which is easy to use. Originally made to sell to customers through Stratum3d.no , but producing many is time consuming. We will continue to make them, but also share the design online. made to hold 3…
This is an adjustable spool holder, which can assembled in various widths. Simple insert the arms in different parts of the slider to adjust the width, and use the removable rings (which can be fixed with a rubber band) to prevent the bar…
This spool is designed to use with threaded inserts I used the ones from cnckitchen: http://cnckitchen.store/shared-products/431146823?ref=v1:431146823:-1510512723 If you use the “inner - minimal” then a full spool need less than 50g. 6x…
I recently purchased an Elegoo Mars 2 Pro and an Elegoo Saturn and I needed somewhere to store my resin so I expanded upon my Modular Pegboard System and made a tilting storage mechanism. The tilt allows you store the bottles more densely…
I designed a 1kg large spool holder for the Toybox Alpha 2 printer that can be printed on the Alpha 2 (And now Alpha 3) small bed size. After having a few spool holders break on me and not work great for cardboard rolls (stressing the…
Here you will find a solid filament holder for 1KG and 3KG rolls. You can choose between a TPU shaft or a solid shaft made of PLA or other materials, for example. The holder is designed to last a long time and fits all common filaments.…
Print it with normal supports
Measure device for AURAPOL 1kg filament spool single color Print from AURAPOL PLA. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check the multicolor version!
The original Prusa version had a lot of bounce and eventually broke. I made some measurements of the broken part, drew it up, made it stronger. The second version ( v2 ) is a mirrored version of the original with a trimmed bottom tab…
*** 28.02.2024 UPDATE *** Long Filament Guide V2.1 *** 26.02.2024 Publication on Printables *** Recommendation PETG or better. You will need an M 3 x 10 mm screw with nut to fix the filament guide to the main holder. With 1 extension you…
Design Concept The 5kg Filament Spool Roller is designed to facilitate smooth unspooling of filament during 3D printing. Its simple yet effective design aims to minimize tangling and maximize efficiency. Use This roller is ideal for…
This is a simple yet robust filament spool holder designed to accommodate spools of any size, from 1kg to 5kg and maybe more. Its simple design is easy to assemble and requires minimal parts as well as not taking up lots of space when not…
An easy Print filament Stand @ 50g filament used to print and mounts a 1KG roll. No Support is needed.
A snap together printed insert to fit the ID of a Polymaker 1Kg cardboard filament spool I don't know if this is considered a remix or not…… I used the design from Alex's model, but I created a new model and design for the snap connector…
Regular PLA from Tecbears, 205 degrees, bed heated at 75 degrees, using a Sovol SV07 Plus, 20% infill. If it was helpful, please consider making a donation to the victims of the floods in Brazil:…
Creality Ender 3 S1 Pro Filament holder adapter (bearings) It is designed so that the coil easily unwinds from the holder and does not tend to get stuck. needed: 2x Allen screw M5 2x bearing with an outer diameter of 30 and an inner…
I adapted this model for OVV3D 1KG cardboard spools to allow them to fit the Bambu Lab AMS. I moved the pegs slightly inward on the front, and made a version for the back without pegs. I added a bit of glue to the back piece since there…
It's assembled on 4х 608zz bearings. Includes two roller Long for 3kg and 1kg spools Short only for small 1kg spools If you want to make something much more complicated than necessary, there is an option "decorative". Everything is…
Hello Makers, you select the filament you want to measure using the dial. The result is the exact remaining filament amount. It is displayed in grams and meters. The weight of the spool is automatically deducted. The Original is from…
This design takes aspects of @Tony 's Longer Original Ender 3 / Ender 5 Spool Holder + Nut , and crandell2's Ender 3 POM V roller Spool Holder on Thingiverse. I love to re-use parts where I can, and POM wheels (or their bearings) are no…
This has been changed to fit Giantarm brand 1kg filament spools. It has also been lowered to 6 drawers instead of 12.
Measure device for Bambulab 1kg filament spool MULTI color Print from bambulab PLA BASIC. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check the single color version!
This is an enclosure (bottom, top, feet) for the Sparkfun's Openscale and also a plate for the load cell. It should work with the strain gauge load cells from uXcell, Sparkfun, and Adafruit; 80mm x 12.7mm x 12.7mm (note that Adafruit's…
I wanted to put a filament stand under the table my printer (ender 3) is standing on so that I could feed filament to it without having this big spool in the way if I wanted to tinker with the printer. Original design by:…
A spool for unspooled 1kg filament. Since the spool is meant to fit an Ender 3 bed it is a little small so cut off or use around 20 to 30 ft of filament first or scale up the spool to fit your printer. The 2 halves should be able to hold…
I remixed spool holder perfectly sized to accept both 1Kg Prusament filament spools and 2KG Pusament filament spools. Other spools may fit, but it requires you to measure :-P The large spool size accepts 125mm maximum spool with and the…
A spool holder capable of holding 1kg filament spools, divided into two pieces so that it can be printed with small printers (100x100x100mm bed required). Top and bottom parts must be fastened using two M2x20mm self-tapping screws.…
Changed based on the feeback on Kapiosk version - for large spools. To avoid the spool rim colliding with the extruder release handle, added a 2cm deep collar to the base of the spindle. This makes the spool rim further away from the…
for storing sunlu 250g spools second model should work for most 1kg spools but is untested it is designed to need as little filament as possible. it has 2 holes for mounting to a shelf. it also has holes in the side to connect multiple…
Lay on its back and print without worries of supports. M4 bolt holes with clearance holes built-in. Washers recommended.
Small, easy and minimalistic print for 1KG Filament spools, wall mounted. I used 23mm dowels (there is 0.3 mm extra clearance in the print). It's tight but no screw needed to attach the dowels to the frames. If needed I can make different…
I have a couple of sealed document boxes that I used for dryboxes for longer-term storage of humidity-sensitive spools of filament. I didn't want the spools touching the silica gel beeds covering the bottom, so, I made this bracket that…
Deprecated. Use Instead: /model/527627 This is a stacking horizontal spool holder/roller, originally designed for PolyMaker's 3kg spools (120mm wide, 250mm OD, 55mm ID). The parts are broken up with the largest being the tray at 250mm…
Included both the 1kg (2.2lb) and 2.3kg (5lb) filament roll models that I use to wall mount almost all of my filament spool rolls. I've printed these in both PLA & PETG and would recommend PETG though it's just a personal preference due…
Here you will find a solid filament holder for 1KG rolls. You can choose between a TPU shaft or a solid shaft made of PLA or other materials, for example. The holder is designed to last a long time and fits all common filaments. If you…
This is a modified set of Prusa CORE One parts designed to create enough side clearance to use a 1kg Wide filament spool instead of the standard 1 kg spool. The buffer holders were adjusted to move the spool outward, and the side handle…
Made this to suit my cardboard spools I buy from a local supplier and my AMS. I printed in PLA to start and also did one in PETG. Both worked great with no support needed at 0.2mm layer height. Has spikes to aid in gripping the cardboard…
Cable Hooks ---------------------------------------------------------------------------------------------------------------- Use Cases Supporting many cables (Similar to a J-Hook) Supporting cable service loops Wrapping up excess cable.…
Gold Bar Secret 1Kg (Gold PLA 3D print) Use fine blade to lever open Lion modified, slightly Custom ID Badges ID_Badge_Lion_Sin_Of_Pride.stl https://www.thingiverse.com/thing:3873645 Category: Containers
I run a very busy printing operation & I mostly print off of 5 kg PETG spools. I've designed what I think is the best, versatile spool holder option for my XL printers. it looks simple at first glance, however, please read the below, as…
Big fan of FxWoody's design, printed the original model in PETG-CF. Decided to remix because I don't use 3kg spools yet…? and wasn't a huge fan with taking the front support off every spool change. Designing a side mounted spool holder…
I designed this so I can transfer the filament from my 250g rolls onto a 1kg spool for use in my Creality CFS. Depending on your printer you may want to add a few dabs of super glue during assembly. Enjoy!
This is a birdhouse with a very simplistic design. It is broken into two parts (LEFT and RIGHT), each part should fit in a (220mm) cubed build volume. The design is meant to be open (preferred by some birds) and easily cleanable (interior…
Remix of the Spool Hanger by icybaker to fit most 1kg spools. I extended the mounting surface to go deeper into a spool and does not rely on the inner lip that some spools have. Mounts easily under shelves (which is where I have them).…
Spool Holder using 608 skate bearings
Why Use Rims? Printed rims improve the strength and reliability of cardboard spools. They also prevent the buildup of cardboard dust that can interfere with material handlers. Which Version? These models fit Polymaker 1kg cardboard…
Adaptador para suporte de rolos de filamentos da impressora Ender 3. Posiciona o rolo de filamentos no meio da coluna Z de forma que o filamento é direcionado ao motor de extrusão com menor curva. A parte maior é fixada no perfil do topo…
Impression de 8 x support et 4 tiroirs
Beliefe it or not, but we are note able to use 2x 1kg Prusament Filament spools on one spool!?! So i modified the Original spool holder. The old one could hold 2x Overture Filament…but not our beloved Prusament. Why didnt they think about…
Works well with the Polymaker cardboard spool adapter. https://www.printables.com/model/495778-polymaker-cardboard-spool-adapter Print with at least 1.6mm minimum walls and 25% minimum infill. the PIN and GUIDE print without support, The…
Elegoo 1KG Cardboard spool adapter for AMS
Filament got tangled in the 4 mm gap between the cardboard core and plastic ends when it was being used in the AMS so I added a 2 mm flange to the insert adapters so that the filament can't get caught in the gap. This is for the 1kg…
Universal stand capable of holding all sorts of spools, that features: Holding up to ⌀270+mm x 105mm wide 3kg spools Widely available 608 bearings for stable heavy spools rolling Aluminum pipe as roller for long life 8mm honeycomb…
This is a 79mm Spool Holder that can support FormFutura 1kg spool and permit to close the door for the Raise 3D Pro2. I printed it using the Raise3D with ABS at 0.2, infill 30% Remix of…
This desiccant box is made to fit the compartments at the front and rear of the 1Kg Modular Filament Storage Box created by Printable Accessories . It includes a ‘trough’ (stand) that makes it easier to fill the box with desiccant, since…
I liked to use the spool holder inside the enclosure. I used an length extender for quite some time but it was a bit too big for the 2kg spools. I found some interesting spool holders like this and ended with extending the version of…
Large Spool Holder fitting most spools including standard 1KG and large 5LB and 9LB spools.
The spool with which you will print quickly. Suitable for 1kg filament. Print settings; 5 wall perimeter, top and bottom solid layers will be set to 0. 10% honeycomb filling. Support for bolt and nut areas. Requires 4 m3x15 bolts and m3…
Spool holder I designed for multiple sizes of spools up to 3 ½" wide to be mounted above the printer on the bottom of a shelf. We use them for all of our 1kg spools and our 200 gram and 250 gram mini spools. you only need to add a 4 ½"…
I've created filament clips here that at least hold up. I had already tested a few, but many of them all went down over time. I have now improved the holders a bit. The mount is now slanted, which means the filament holds a little better.…
Sikagel insert for 1kg boxes with hygrometer receptacle. Thought for this box : https://shop.filamentonline.de/de/home/137-filament-safe-box-fuer-1kg-spulen.html and this hygrometer:…
This is something I made for my Anycubic Kobra 3 because I had smaller rolls that would not fit in my ACE. If you guys are having the same problem, here you go! No support needed and can be made with any filament.
![Stackable Horizontal Spool Holder for 1kg or 3kg Filament [V2]](https://media.printables.com/media/prints/527627/images/4290070_cb6640df-ca40-4912-b6b8-ee13e6ff264c/2023-07-19-224844.jpg)
![[~50g filament usage] ESUN, ROSA3D, Prusament, Kraus spool (1Kg refill coil)](https://media.printables.com/media/prints/135190/images/1291358_221e72b2-298c-4745-babe-2a166e0894d2/img_5168.jpg)
![[Deprecated] Stackable Horizontal Spool Holder for 1kg or 3kg Filament [V1]](https://media.printables.com/media/prints/418149/images/3469358_e92082d3-d2b1-463b-ae22-3fd1580de5eb/spoolholder_twostacked.png)
