Prusa Spool Holder - For both 1kg and 2kg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
3,65 € – 4,46 € netto (bez VAT)
Dla pliku: 1kg_0.15mm_PETG_MK3S_5h1m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,05 € netto (środek widełek).
- Masa podana przez autora
- 33 g
- Czas druku podany przez autora
- 5,01 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Prusa MK2/3/4 compatible spool holders. Models fit their respective spool weights (1kg and 2kg)
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 296
- Wydruki
- 2
- Wyświetlenia
- 767
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Summary:
This spool holder component is for Prusa MK2, MK3, and MK4 printers. This spool holder is compatible with the default provided injection molded spool holder from Prusa, and matches the same aesthetic.
The 1kg version of this model is a direct replacement for the Prusa component which only fits 1kg Prusament spools, while the 2kg version of this model fits 2kg Prusament Spools.
Spool Fitment:
- Width, 1kg Model: Fits up to 3.75" (95mm) wide spools
- Width, 2kg Model: Fits up to 5.60" (140mm) wide spools
Build Statistics: (Per piece, 1x)
- Material Consumption: 35g (1kg holder) / 50g (2kg holder)
- Runtime: [MK3S+] 5h1m (1kg holder) / 7h11m (2kg holder)
Recommended Build Settings:
- Material: PETG, ASA, or ABS (Stronger materials recommended, PLA not recommended)
- Infill: 100% Recommended
- Layer Height: 0.15mm
- Nozzle Size: 0.4mm
- Supports: Supports are recommended, but only 2 small supports are required on the twist lock nubs. Make sure to use “Snug” supports to minimize the support structure. See attached images for how the supports should look.
