Liczymy pasujące modele…
9 ¾ train platform sign I designed from Harry Potter Studios / Hogwarts Express Few ways it can be mounted: - Mounted to a wall etc with screws - Can be used with Ikea Skadis - Can embed magnets see the remix to embed magnets . Make a…
This model is compatible with the lego system.
A 60 degree connector for LEGO train tracks (not DUPLO). Updated with a fixed .STL (this was one of my first designs and there were some small overhangs I hadn't noticed). No supports needed, but there are small ones built in at the end…
This model is compatible with the lego system.
This model is compatible with the lego system.
I have printed all of these at .2 or .15 mm in PETG. Worked well in operation.
I sculpted this body to be a body compatible with smart doll heads, specifically meant to resemble a trans masculine person, because that's a representation I don't see a lot in the bjd hobby. This is the first body I've sculpted and so…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Holds your Ryobi 4v batteries, or USB Lithium batteries, or Milwaukee INKZALL Large markers to a Link rail Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a recreation of the P-51B Mustang canopy release lever, combined with a mount and dual-action electronic switches, for use in flight simulators. It was designed to mimic, as closely as possible, the size and shape of the original,…
This model is compatible with the lego system.
These buffer stops will keep your wooden trains from running off the ends of the rails. All pieces print without supports. Feel free to message me if you need a custom size, and click here to check out my other train designs. Update 17…
The plug is fully compatible with the Bambu original. The refill system is retained. As you can see at first glance, I have modified the design to one I like. Where the inspiration comes from is probably obvious right away, but it's just…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
This is a Lego-compatible enclosure and a gear for 140-class DC motors, which you can get for dirt cheap almost anywhere and you can control via microcontrollers, Raspberry Pi's, etc. Print face down! See slicer screenshots for reference.…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
Extender feet for elegoo neptune 3/4 pro
I printed this pretty hot in PETG so it ended up shiny. I extended the lower buffer skirt and added a slot for a drawer to add desiccant/silica. 0.3mm Layer Height Perimeter min of 3 Avoid crossing Perimeters Solid layers Bottom 4 Fill…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I wanted to put this LEGO Question Mark Block on a shelf. The only space which was available was at the very top. In order to display it in a cool way I designed these feet which balance the block on its edge. It is perfectly balanced…
Current Version: 2.3 Tested and currently in use by me on my 24s2p build pictured. BTG WTF rails, 11.5x7 Burris, VOW's V2 battery box. NOTE: THIS BOX REQUIRES A MODIFIED FRONT BANG BUMPER FOR FITMENT . This dual-lid controller box is…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
From the first time I got my MMU, I didn't like the margarita style spool holders for the buffer, because it requires space that I do not have. I came up with this solution. It can accomodate up to 4 spools on top of Prusa MK3. I only use…
This model is compatible with the lego system.
This model is compatible with the lego system.
Follow instructions of the original post. Changes are described here: It is recommended to use M2 inserts with 3.5mm diameter for mounting the top plate, the button holder and the throttle stick holder. 3.2mm is too lose. I used M2.5…
Maturity: Very Good. 9 prototypes. In use since 2024/03. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount 2x M6x16 to screw the mount on the aluminium profile (M5 if you have M5 nuts) 2x M6 rail nuts Log: 2024/03 Initial…
Lego Duplo kompatibler Bodenverschluss für Duplosteine 0,8 mm hoch. --------------------------------------------------------- Lego Duplo compatible end closure for Duplo bricks. 0.8 mm height.
Lego Duplo kompatibler Bodenverschluss für Duplosteine 0,8 mm hoch. --------------------------------------------------------- Lego Duplo compatible end closure for Duplo bricks. 0.8 mm height.
Lego Duplo kompatibler Bodenverschluss für Duplosteine 0,8 mm hoch. --------------------------------------------------------- Lego Duplo compatible end closure for Duplo bricks. 0.8 mm height.
Lego Duplo kompatibler Stein mit halber Höhe (halbhoch, daher so hoch wie ein normaler Legostein) ------------------------------------------------------------------------- Lego Duplo compatible brick (half height, so the same height as a…
Lego Duplo kompatibler Stein mit halber Höhe (halbhoch, daher so hoch wie ein normaler Legostein) Dieser Stein hat exakt die Größe eines 4x2 Normalsteins ------------------------------------------------------------------------- Lego Duplo…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This remix of the Modular 19" Rack Mount modifies the 1HE brackets by adjusting the mounting hole width for improved fitment. With these changes, the brackets should now also be compatible with 10" racks, expanding their usability beyond…
This is a remix of https://www.printables.com/model/253408-customizable-lego-compatible-text-brick-key-fobs While the original creates a perfectly fitting LEGO brick, the ring to which you attach a keyring lies flat on the print bed. This…
Simple Cable Wrapper to organize small data cables. Compatible with MULTIBOARD. Can be mounted with two screws to any surrface or to the small peg holes of the Multiboarrrd system using small threads. The dividers and slots are offset an…
A quick and effective way to mount one hard drive on top of another, perfect for cases with a single HDD mounting slot. Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P as well as all Elite 501 and 301/2 Cooler Master…
Picture of the final build will follow This is my version of the TFT50 Screen from BigTreeTech. Ive added a magnetic mount so the screen can be easily removed for maintenance. It is also compatible with the Clicky Clacky Door. It useses…
To be able to use the Bosch toy screwdriver with MakeDo screws, I conveniently edited @GuillaumeRico 's FreeCad file for M12 bolts. The motor is barely powerfull enough to actually screw the MakeDo screws in more solid cardboard, but it…
Uploading a few old designs. If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store . _______________________________________________________…
Uploading a few old designs. If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store . _______________________________________________________…
It is compatible with lego.👍 Oh, and thanks to athan.cz for the picture.
As requested by a Reddit user. It also fits at least The Army Painter Speed Paint bottles, which are quite similar.
I found myself at the beggining of another LEGO collection in possesion of my kids. It needs to stay organized and searchable. The set of bricks that found it's home within Lego Classic Creative Suitcase 10713 has increased. The Divider…
I believe the Atomic shroud by Filip to have the best cooling of all the shrouds I've tested. Most other shrouds have poor output or the air stream is directed behind the nozzle instead of at the tip. This one is perfect except it didn't…
Quad Lock Compatible Windshield Phone Mount This phone holder is designed for motorcycle windshield pipes with a 10mm diameter (currently in use on a Peugeot Django ). It is fully compatible with Quad Lock systems and accessories. Pro…
Tetrix compatible control&expansion hub mount
180mm Vixen GP compatible rail with several versions. The rails are designed for telescopes on the smaller side. As the rails are made with 3D Printed plastics I can't guarantee a max load, so print and use at your own risk! The slots on…
Just got my Yaesu and realized I needed a stand to tilt the radio up, and provide a place for the microphone to attach. I came up with this simple model. This holds the entire radio and not just the face which is what I wanted. I printed…
Overview This is a Gridfinity-compatible housing for Raspberry Pi (Raspberry Pi 3 and 4), designed with flexibility and organization in mind. It's a personal project I made for my setup and decided to share in case it’s helpful for others…
This model is compatible with the lego system.
This model is compatible with the lego system.
It is a 2x2 plate which should be compatible with all your other Lego.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a remix of GutBomb's "BlueSCSI v2 5.25" PC Drive Bay Mounting Bracket" to work with the original PowerMac 6100 CD (tray or caddy) front panel. I used OpenSCAD to move the mounting of the BlueSCSI up by 7 mm so it fits inside the…
This model is compatible with the lego system.
A 90-degree bridge ramp for wooden train track that allows train cars to transition smoothly between different elevation levels while making a quarter-turn (90-degree) curve. The curved design makes this piece ideal for smaller play…
This is a remix of the Thin Man by Tosh (thingiverse.com) using LEGO Compatible parts [v1] (120+ parts) by Snity . Print instructions: Infill: Recommended 15% Supports/Brims: Only needed supports in sitting
These are upgrade parts to turn your original magazine into a 20 round one. Source files (FreeCAD 1.0) are included. Parts needed: M3x12mm DIN912 socket head screw Spring from Diana Chaser magazine… …or wind your own spring: 10.5mm outer…
Key Benefits: Attach LEGO figures to quickly grab kids' attention during photo shoots. Easily differentiate your equipment during group projects or events. Printing Details: Recommended Layer Height: 0.10 mm Printing Time: Approximately 8…
Bring the stoic craftsmanship of the dwarves to your battlefield! This dwarf-themed terrain set is designed for Grimdark Future and other sci-fi or fantasy wargames. The collection offers a complete table’s worth of terrain. What’s…
Last update of this page was: 2026 04-07 These are the STL files for various 18v and 40v Ryobi battery interfaces. Other models I have listed on Printables may require one or more of these parts. Minimum of 14AWG wire is required for all…
Warning: This will be tedious as hell to make but I figured it was still worth sharing. If you find any improvements to the method and/or models by all means share it in a comment and/or remix. Soldering and wire stripping equipment will…
Airpump handle broke years ago so I designed this one. The original screws just barely push by but it works for me. 0.25 layer height, 4 perimeters, printed in petg.
My take on the Dyson accessory holder, as I had trouble with alternatives being incompatible with the powered accessories of the v15. Designed to be printed without supports. Should be a tight snap fit, but you might want to scale it up…
This is an adapter that allows you to attach the filament tube directly to the print head assembly without any connectors. It is recommended to use support normal when printing for the best surface finish. This drawing is applicable to…
