1 / 2
Seiko NH3x / NH7x Hand Setting Tool Stand – Dust Cover Compatible — zdjęcie 1
1 / 2

Seiko NH3x / NH7x Hand Setting Tool Stand – Dust Cover Compatible

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand for Seiko NH3x–NH7x hand setting tools, compatible with dust covers. FreeCAD file included for customization.

Ocena
0 / 5
Polubienia
7
Pobrania
55
Wydruki
0
Wyświetlenia
343
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

When assembling a dial and installing hands on a Seiko NH movement, minimizing movement handling can make the process easier and safer.

This stand is designed to hold a hand setting tool for NH3x–NH7x movements while remaining compatible with standard watchmaker dust covers.

The idea is simple: use a single support for both dial installation and hand setting, avoiding the need to move the movement between different holders during assembly. This helps reduce handling and allows the movement to remain protected under a dust cover throughout the process.

It’s a small but useful accessory for anyone assembling, modding, or servicing watches based on Seiko NH movements.


Features

  • Designed for Seiko NH3x / NH7x movements (NH35, NH36, NH38, NH70, etc.)

  • Compatible with watchmaker dust covers / dust domes

  • Allows using a single support for dial installation and hand setting

  • Helps reduce movement handling during assembly

  • Compact footprint for a watchmaking bench

  • Simple and robust design


Printing

The model was tested with the following settings:

  • Material: PLA

  • Infill: 15%

  • Supports: Yes

  • Orientation: As provided in the STL

These settings provide enough strength while keeping print time short.


Customization

Hand setting tools can vary slightly in diameter depending on the manufacturer.

To make customization easy, the FreeCAD file is included, allowing you to:

  • Adjust the tool holder diameter

  • Modify clearances / tolerances

  • Adapt the height or geometry

If you adapt it for other tools or movements, feel free to share your remix.

Tagi