Wyniki wyszukiwania: seiko

Seiko NH movement holder

Movement holder for Seiko NH series of movements

Seiko Watch Case Back Socket

I created this tool to help with opening and closing the case back on my watch. It's confirmed to work with a Seiko SBDC051. This might work with other models that have a 30mm distance between the case back slots. One of the photos shows…

Seiko Watch Caseback Removal Tool

I couldn't find an existing caseback removal tool that worked for my watch. The height of the caseback and the crown position were added constraints. The chamfered lip provides enough clearance to not contact the crown. The ribs provide…

Seiko Caseback Opener

A simple opening tool that fits perfectly on Seiko automatic watches such as the current Seiko 5 sports series or the legendary skx. If you find a model that does not fit, feel free to comment exact dimensions.

Seiko NH movement holder for NHXX and 7SXX

I wanted a movement holder for my Seiko watch modding, which would sit steady when fitting hands and carrying out other work. The holder is designed to have a very small lip. making it suitable for placing movements in upside down with…

Seiko VH31 / Miyota 2115 movement holder for Seiko NH34 NH35 NH36 NH38 watch casees

Instead of using mechanical movements for watch builds, I wanted to use quartz movements like the Seiko VH31 and Miyota 2115. Since both quartz movements are similar is size and shape, this casing ring will fit both of them. I designed…

Miyota 2035 quartz movement holder for Seiko NH34 NH35 NH36 NH38 case

This is a movement holder/casing ring for the Miyota 2035 (not 2305) quartz movement so it can be adapted for a case for Seiko NH series of mechanical watches. Great for mechnical to quartz conversions or for anyone looking to build a…

Seiko NH Movement Regulator Tool

Align pins of the base with holes indicated by the red arrows (movement diagram), and gently lower the wheel/handle part through the cylinder. Design is loose enough to wiggle around any inaccuracies. Note: In the latest revision, the…

Seiko 7009 movement replacement dial spacer

This is a dial spacer ring replacement for a vintage Seiko 7009 movement, similar to Seiko part 884 283. This fits between the dial and the main plate and prevents the dial from fouling the day and date wheels. It also helps center the…

Casing ring to use Seiko VH31 instead of NH35

If you talk to a watchmaker about replacing a mechanical movement with a quartz movement, you will hear many reasons why this is not possible. The intended replacement may be too small, too big or require the dial feet at another…

Seiko 7009 Regular Movement Ring

This is the standard movement spacer ring used in the Seiko 7009A type watches.

Ronda 515 quartz movement holder for Seiko NH34 NH35 NH36 NH38 case

Movement holder/casing ring for the Ronda 515 (and 515.24) quartz movement to be used in Seiko NH series watch cases (eg. NH34/NH35/NH36/NH38/etc) I sketched it up and exported it to STL. My Youtube build video: Print Settings Printer…

Seiko NH35 second hand watch tool

Setting the second hand while modding a watch can be a real pain. This tool makes it trivial. Most printers can print it fine without supports. This is a fork/variation of Flennery's excellent tool.

Seiko watch dial holder

A small easy-to-print holder for Seiko NH / 7S dials with any feet positions. The dial can sit on the platform for easy working, without risk of bending it. Thin recessed lines in the top create alignment points when adding logos etc,…

Miyota 2305 day date quartz movement holder for Seiko NH34 NH35 NH36 NH38 case

Movement holder/casing ring for the Miyota 2305 (NOT 2035!) quartz day date movement to be used in Seiko NH series watch cases. Since the Miyota 2305 movement is much smaller than the NH34/NH35/NH36 mech movements, a spacer is required to…

Seiko 6138/6139 Movement Holder

Movement holder for Seiko 6138/6139. You may need to adjust your scale settings on your slicer depending on your filament settings and how much shrinkage/expansion you get. Printing this with PLA worked just fine for me though! Center…

Seiko NH Movement Holder

Just a simple movement holder for Seiko's NH-series of movements. Useful when working on the movement or installing dials and hands. The movement may be a tight squeeze, but that's intended; don't want it to fall out! However, if you do…

Seiko Watch Case Back Opener

Rigid Design & Ultimate Reliability

Seiko Pulsar Watch Tool

Seiko 5 Watch Caseback Removal Tool

This tool allows you to remove the caseback on your Seiko 5 SNXS style watch to perform the slim caseback mod (from monsterwatches.eu). I'm not sure which other Seiko models it works for but give it a try and let me know! The print shown…

Seiko 7016 Movement Holder

Print with 0.2mm nozzle, 0.1mm layer height, high infill for best results. This can be used with pushers or rods, in order to test the movement while it's out of the case, as well as to hold the reset button during setting of the chrono…

Seiko SKX007/009 Tuna Type Shroud

This is a Tuna Type Shroud I designed and made similar to the Dragon Shroud being sold online. Print this with some supports, if you can break it up and avoid it in the corners it can be easier to remove. It is designed with some 45…

Modular frame for 7 Segment Counter (Seiko ST306 - inspired)

Here is a modular frame for 1/2/3 or more two-digit 7-segment counters, designed by @Flower3D_1945812. All tolerances are set to 0.25 (as 0.25 wall-to-wall). This must be enough to glue the parts together without much filing. I recommend…

Copal & Seiko Shutter Universal Label

Copal & Seiko Shutter Universal Label Print in A4 for later type copal shutter Updata 260909: Fix Copal No.1 label Update 260603: Add seiko types

Ronda 515 quartz movement holder for Seiko NH34 NH35 NH36 NH38 case

Movement holder/casing ring for the Ronda 515 (and 515.24) quartz movement to be used in Seiko NH series watch cases (eg. NH34/NH35/NH36/NH38/etc) I sketched it up and exported it to STL. My Youtube build video: https://youtu.be/m71-DxZAqvw

Seiko NH34 GMT Hand Pusher tool

This is a tool for pushing the GMT hand on watch. Printed in PLA

SEIKO - NH05 Holder

The model proposed here is a holder for the Seiko NH05 movement. It allows you to securely place the NH05 movement so that you can mount your hands on your dial.

Miyota 2034, 2035, 2036 holder for Seiko NH35 cases

Holder for the Miyota, 2034, 2035 and 2036 so that it fits within NH35 cases. Gap at the 3 oclock is for the stem Large gap at the 12 oclock is for easy battery removal Square gaps at the 1 oclock and 8 oclock is for nh35 dial feet, for…

Seiko 5 sport watch press dies for GVC's press.

designed dies for GVC's watch press, that fit my seiko 5 sport.

Seiko NH3x / NH7x Hand Setting Tool Stand – Dust Cover Compatible

When assembling a dial and installing hands on a Seiko NH movement , minimizing movement handling can make the process easier and safer. This stand is designed to hold a hand setting tool for NH3x–NH7x movements while remaining compatible…

Seiko 6309 Dial Spacer

This was a many-variant project that required a lot of tweaking, and I'm still not sure if I got it right. If you run into issues, let me know and I can try to adjust. Print with the smallest nozzle and finest resolution you can have. I…

Seiko Caseback Opener 40mm Case

Seiko Watch H55X H558 H556 Movement holder

After a few issues trying holder this movement in my normal holder I gave up and made this. This is made too tight so it will need to be trimmed to size. Print in PETG so you have some flexibility. I printed with 25% infill and it was…

Movement Holder (Seiko S-651 substitute)

This is a model that replicates the functions of a Seiko S-651 movement holder. I designed it to hold a Cal. 4336A movement but it will work with several 1970's and 1980's GS Quartz 25mm movements. Print Settings Printer Brand: Creality…

The PrusaWatch Seiko adaptor

fell in love with the desgin but when I tryed to put it on my seiko (king turtle) the holes was way too small and i didnt like the round ends. made the holes bigger and flaten the end. hope u enjoy

Seiko H357 watch movement

Found holding the Seiko H357 difficult with my holder so created this. Printed in Petg to give it some flex. Infill 25% which is fine.

bracelet de montre seiko

Afin de remplacer mon bracelet textile qui commençait a s user , voici un remplaçant tout en TPU. Le premier anneau vient se clipper dans le grand bracelet et le deuxième se glisser avant le remontage. L'entrecorne est de 22mm max donc…

Help for twisting momentum on watch (seiko 5 sport)

I needed to unscrew the back from my watch. Gal3D's socket worked on the back of my seiko 5 sport automatic- but i had no grip on the front while twisting. this model solved that.

Movement Spacer Seiko 7009-5850

Replacement movement spacer for the seiko 7009 movement sized for the 5850 case, probably works for other case refs but

Seiko PC32 - Epson AX32 AX33

This movement spacer/holder should fit AX32/AX33/PC32/PC33 by Epson/Hattori. Check out my build video to see how it's used. I also designed other move spacers so check out my other designs. Build Youtube video:…

Adapter ring for Fujinon SW 125mm 5.6f w/ Seiko LS 44 shutter for Chroma Six 17 camera

This is an adapter ring that allows for a Fujinon SW 125mm 5.6 aperture medium format lens to fit the appropriate lens cone and board for the chroma six 17 camera. I received mine and the shutter isn't what was recommended so the lens…

SEIKO - NH05 Holder

The model proposed here is a holder for the Seiko NH05 movement. It allows you to securely place the NH05 movement so that you can mount your hands on your dial.

Seiko 6138/6139 Movement Holder

Movement holder for Seiko 6138/6139. You may need to adjust your scale settings on your slicer depending on your filament settings and how much shrinkage/expansion you get. Printing this with PLA worked just fine for me though! Center…

Seiko Pulsar Watch Tool

Adapter ring for Fujinon SW 125mm 5.6f w/ Seiko LS 44 shutter for Chroma Six 17 camera

This is an adapter ring that allows for a Fujinon SW 125mm 5.6 aperture medium format lens to fit the appropriate lens cone and board for the chroma six 17 camera. I received mine and the shutter isn't what was recommended so the lens…

Seiko Ayase from Dandanda anime

if you want NSFW versions join the club and text me

Copal & Seiko Shutter Universal Label

Copal & Seiko Shutter Universal Label Print in A4 for later type copal shutter Update 260603: Add seiko types

Dandadan Seiko Ayase Bat

A basic 3d-printable model of the bat used by Seiko Ayase from the anime Dandadan This includes both a full version and one split into 5 parts for assembly using 4mm support rods

Watch wrench (SEIKO)

Wrench to unscrew the back of SEIKO watches. I'm not sure how standard this back cover is. I assume it will work with other watches. As always, I have included the OpenSCAD code, so you can adjust if it doesn't fit with your watch. I'm…

Seiko S-450, S-451 pressure tester button

Seiko S-450 / S-451 are professional watch dry pressure testers that sometime show up on eBay auctions. Often they are missing parts, like the o-ring seal and air compressor. But also the support button that helps prop up the watch being…

Seiko monopusher bezel 45899

This is a replacement plastic bezel for the seiko monopusher 45899. Since the original is almost impossible to find. Print in black resin (or paint black), nummerals should be white. The bezel can be pushed onto the watch and stay there.…

Seiko H357 Glass Removing Press Tool

Model to fit some Seiko H357 models, it won't fit all as they reused the movement on a number of styles. Please note this is untested as I haven't used it yet. I printed at 100% infill.

Seiko 7009 Movement Rig Large

Seiko movement ring for larger type 7009A watches, divers etc...

Seiko SRPK Vise Adapter

A simple adapter for holding a Seiko SRPK watch in a standard vice. Inspired by https://www.printables.com/de/model/582000-watch-vise-adapter and used in https://www.printables.com/de/model/51074-fast-operation-vise .

Seiko NH Low Profile Holder

Low profile holder for NH movement family. Designed to hold movement with dial holder (OD29,36mm). Print Settings Supports: No Resolution: 0.2 Infill: 100% Filament: FDplast PETG Green