Seiko Watch Case Back Socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This socket is used to open and close the case back on some Seiko watches.
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 621
- Wydruki
- 6
- Wyświetlenia
- 3196
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I created this tool to help with opening and closing the case back on my watch. It's confirmed to work with a Seiko SBDC051. This might work with other models that have a 30mm distance between the case back slots. One of the photos shows this dimension.
I modeled gripping surfaces around the circumference of the socket so it can be turned by hand, and also incorporated a square hole to be used with a 1/4” ratchet if extra torque is required.
I printed mine in PLA with a 0.4mm nozzle, 0.2mm layer height, 4 perimeters, 5 solid top and bottom layers, 20% gyroid infill. No supports required.