Seiko 7009 movement replacement dial spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dial spacer ring replacement for a vintage Seiko 7009 movement, similar to Seiko part 884 283. This fits…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 231
- Wydruki
- 1
- Wyświetlenia
- 1616
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a dial spacer ring replacement for a vintage Seiko 7009 movement, similar to Seiko part 884 283. This fits between the dial and the main plate and prevents the dial from fouling the day and date wheels. It also helps center the movement in the case.
I printed this and verified it fit on 7009 movement. This may work on other 7000 series movements if they use the same part number, I haven't checked.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
Doesn't matter
Infill:
100%
Filament: Doesn't matter PLA Doesn't matter
Notes:
I used a standard 0.4mm nozzle and 0.12mm Z height with a heated bed. I used Inland PLA+ from Microcenter with good results.
I didn't require any post-processing on my printer, but your mileage may vary. If you sand or shave anything off, make sure you clean it well before putting in the watch.
How I Designed This
Measured an existing part with calipers and recreated it in Tinkercad.
Category: Jewelry