Bag Clip with Screw Cap for 1kg Coffee Beans Bag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bag Clip with Screw Cap for 1kg Coffee Beans Bag
- Ocena
- 4,778 / 5
- Polubienia
- 899
- Pobrania
- 6611
- Wydruki
- 69
- Wyświetlenia
- 21 704
- Oceny
- 63
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 6. Aug. 2023
The STL ist about an 1cm larger than what you see on the Lavazza photo. You can print it a little bit smaller if you want. Especially if you put you coffee bag into a Kellog's tin can as shown in the background.
Update 5. Aug. 2023
I didn't recognize Fusion didn't save the size. So I rexported the STLs and also closed the angle as you weren't able to print it on small printers (I own a SV04). Printing it today again.
I wanted to use this clip for a standard 1kg coffe bean bag and even the large version was way to short. I edited the project and lengthened the clip 3cm. The rest stayed the same. It is still hard to open it af. So either live with it (I use a knife to pry it open) or cut the overhang a bit.