Ozito CMS-210 210mm Drop Saw Vacuum Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small adaptor to connect a 35mm vacuum hose to the dust outlet of a Ozito drop saw.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
A very simple model I created to connect a Ryobi 35mm shop vac hose (RVC-1220I-G) to an Ozito drop saw's 40mm dust outlet (CMS-210). This is honestly just 2 cylinders; one end is 40.25mm ID and 20mm deep, the other is 35.25mm ID and 30mm deep. I included the extra 0.25mm clearance so it would fit tightly; I used a rubber mallet to knock it onto the saw. The vac hose slides in and out easy enough with a bit of force.
I printed this in some spare PLA with a 0.4mm nozzle at 0.28mm layer height, 100mm/s, 200°C nozzle and 45° bed with no parts cooling fans. Takes about 90 mins. Hopefully it's of use to someone.