Ozito CMS-210 210mm Drop Saw Vacuum Adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small adaptor to connect a 35mm vacuum hose to the dust outlet of a Ozito drop saw.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
A very simple model I created to connect a Ryobi 35mm shop vac hose (RVC-1220I-G) to an Ozito drop saw's 40mm dust outlet (CMS-210). This is honestly just 2 cylinders; one end is 40.25mm ID and 20mm deep, the other is 35.25mm ID and 30mm deep. I included the extra 0.25mm clearance so it would fit tightly; I used a rubber mallet to knock it onto the saw. The vac hose slides in and out easy enough with a bit of force.
I printed this in some spare PLA with a 0.4mm nozzle at 0.28mm layer height, 100mm/s, 200°C nozzle and 45° bed with no parts cooling fans. Takes about 90 mins. Hopefully it's of use to someone.