Holman Retractable Hosereel Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-mount swivel bracket for Holman 20m retractable hosereel.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 307
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
My old Holman 20m retractable hosereel bracket failed from UV exposure and weight of the reel.
I designed a direct replacement that works well. I've only had it in use for 2 weeks so far but seems to be holding up well.
Printed in PETG with 50% infill and 6 outer layers for max strength as it holds a lot of weight and force when the hose is pulled.
Unfortunately requires quite a lot of supports as it should be printed as per installed orientation for best strength.
My print was a bit rough with layer separation due to low temperatures (I was using a new filament and didn't have it dialled in) but filled these gaps post-print with some CA glue and seems to be working fine.