Creality Ender-5 PSU Terminal (Contacts) Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The terminals on the PSU of an ender 5 are not covered. This fixes that. It will not prevent short or shocks when…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The terminals on the PSU of an ender 5 are not covered. This fixes that.
It will not prevent short or shocks when poking around with a screenshot driver or other conductive items, but at least you won't accidentally touch them.
I tried to be inclusive; there is a 240v, 230v, 110v, "Danger!" and a blank protector. (The last one in case you want something else written on it)
Insert the top site first, then click in the bottom side.
DISCLAIMER
I am not responsible for you getting shocked; always power off and disconnect the power lead before opening up the electronics case.
Just because I do not listen to my own advice does not mean that you should not either!
(Phil Collins said it; "Just do as I say, don't do as I do." and James Hetfield as well; "You can do it your own way, if it's done just how I say")
Consider yourself sufficiently warned ;)
important note;
Although the Landy LRS-350 is a clear and obvious Mean Well clone, the parts are slightly different so this guard will NOT fit an original Mean Well.
For Mean Well LRS-350 series; see https://www.thingiverse.com/thing:4781360
My Ender-5 build so far
https://www.thingiverse.com/make:890134
Category: 3D Printer Parts