Creality Ender-5 PSU Terminal (Contacts) Guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The terminals on the PSU of an ender 5 are not covered. This fixes that. It will not prevent short or shocks when…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 40
- Makes
- 0
- Views
- 324
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
The terminals on the PSU of an ender 5 are not covered. This fixes that.
It will not prevent short or shocks when poking around with a screenshot driver or other conductive items, but at least you won't accidentally touch them.
I tried to be inclusive; there is a 240v, 230v, 110v, "Danger!" and a blank protector. (The last one in case you want something else written on it)
Insert the top site first, then click in the bottom side.
DISCLAIMER
I am not responsible for you getting shocked; always power off and disconnect the power lead before opening up the electronics case.
Just because I do not listen to my own advice does not mean that you should not either!
(Phil Collins said it; "Just do as I say, don't do as I do." and James Hetfield as well; "You can do it your own way, if it's done just how I say")
Consider yourself sufficiently warned ;)
important note;
Although the Landy LRS-350 is a clear and obvious Mean Well clone, the parts are slightly different so this guard will NOT fit an original Mean Well.
For Mean Well LRS-350 series; see https://www.thingiverse.com/thing:4781360
My Ender-5 build so far
https://www.thingiverse.com/make:890134
Category: 3D Printer Parts