Sound moderator 40x100+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The sound moderator is designed to cut off the air stream and disperse it.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 404
- Wydruki
- 0
- Wyświetlenia
- 2597
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning: Do not use a printed tube to make a moderator.
A moderator of any length, including an integrated one, can be assembled from a set of cones. The moderator is assembled on the basis of a 40x1.5 mm aluminum tube. Secure the covers and the sprocket with the m3 mounting screws. There is an m12 thread in the back cover. For installation on pistols with internal thread, I recommend using an m12 threaded tube.
The sides of the caps are 1 mm larger than the pipe diameter for mounting the heat shrink tube.
Added step files for adjusting the landing dimensions for different trunk diameters of the integrated moderator.