Sound moderator 40x100+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The sound moderator is designed to cut off the air stream and disperse it.
- Rating
- 0 / 5
- Likes
- 45
- Downloads
- 404
- Makes
- 0
- Views
- 2,597
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning: Do not use a printed tube to make a moderator.
A moderator of any length, including an integrated one, can be assembled from a set of cones. The moderator is assembled on the basis of a 40x1.5 mm aluminum tube. Secure the covers and the sprocket with the m3 mounting screws. There is an m12 thread in the back cover. For installation on pistols with internal thread, I recommend using an m12 threaded tube.
The sides of the caps are 1 mm larger than the pipe diameter for mounting the heat shrink tube.
Added step files for adjusting the landing dimensions for different trunk diameters of the integrated moderator.