P
PrintablesDaniel Kasprowicz
Box for airgun pellets - Straton
Box for airgun pellets - Straton Box for airgun pellets in the shape of JSB Straton. The box can hold approximately 200 pcs of airgun pellets.
- Downloads
- 111
- Likes
- 15
- Rating
- 0
Search results: airgun
Counting matching models…
P
PrintablesAlvomane
FX Airguns Dreamline trigger lock | FX Airguns Dreamline Abzugssperre
This is a trigger lock to prevent unauthorized use of an FX Dreamline pcp air rifle. Simply print in STL orientation at 0.2 layer height and 25% infill with no support, attach a padlock and lock. The trigger lock will work with any…
- Downloads
- 104
- Likes
- 17
- Rating
- 0
P
PrintablesStaszek Salik
Springfield XDM Airgun Magazine Holder
Purpose is to transport airsoft replica magazine separate from the gun, just like you would do with a real deal. It does not make much difference safety-wise with an airsoft replica. Yet, the purpose of owning airsoft replica is to train…
- Downloads
- 17
- Likes
- 4
- Rating
- 0
P
PrintablesFaceHaver
Airgun Silencer - One Piece 8 Baffles
I really liked Silencer \ suppressor \ moderator (lead dust collector) for airgun by Masochisti , but wanted it in one easily printable piece. I don't have any 40mm tube around and printing tubes on their own has given me a bad taste. I…
- Downloads
- 1,676
- Likes
- 100
- Rating
- 4.67
P
PrintablesVik
Silencer for .22 Airguns (Crosman 2250)
An airgun silencer, model supplied for 22 calibre, with an expansion chamber and K-type baffles that prints without support. Particularly useful for silencing CO2 and pneumatic airguns, designed for the Crosman 2250 “Ratcatcher.” Firearms…
- Downloads
- 1,094
- Likes
- 62
- Rating
- 4
P
Printablesquietmesh
Silencer for airguns and air pistols - Full-size - Standard thread
Disclaimer: Please obey your countrys law regarding silencers. Fits .177 (4.5mm) and .22 (5.5mm) caliber airguns It might be tricky to get the threads right, if you have a threaded tap, use it :D
- Downloads
- 987
- Likes
- 100
- Rating
- 0
P
PrintablesFaceHaver
PBM Ringo-One Piece - PCP Airgun Moderator
I loved puhlbo's PCP Airgun Moderator / Suppressor but wanted to be able to print with less material and in less time. This answers that. Seems to work very well on a 6 FT LB air arms S200. I don't have a db tester, but it definitely…
- Downloads
- 864
- Likes
- 57
- Rating
- 4
P
PrintablesKerry
Airgun Moderator/Suppressor/Silencer
I print this with some brim, because it's rather tall for how little area it has to adhere to the print bed. Needs no support. I printed it in PLA but I assume any filament will also work fine. Should fit any airgun with a ½"-20 UNF…
- Downloads
- 773
- Likes
- 54
- Rating
- 5
P
PrintablesRick Peters
Bottle Clamp 60 mm Airgun
These things are quite expensive in metal on the internet and I thought I could do a great job creating it on a 3D printer in PETG because of the flexibility combined with strength. Had to adjust sizing to fit the exact ISO picatinny…
- Downloads
- 605
- Likes
- 34
- Rating
- 0
P
Printableszzet
JSB target shooting pellet for airguns
Model of JSB 10m target shooting pellet. One with JSB logo, one without logo. Model without logo - print upside down.
- Downloads
- 550
- Likes
- 44
- Rating
- 5
P
PrintablesFaceHaver
PBM Ringo double length - One Piece Airgun Moderator
I love puhlbo's PCP Airgun Moderator / Suppressor , and my one piece remix works, but wanted something quieter. As the original does a very good job of reducing sound, I took the original files as a base, and doubled the number of…
- Downloads
- 531
- Likes
- 26
- Rating
- 5
P
PrintablesBill Ruehl
Parallax Wheel for an Airgun Scope Element Helix
I ended up with this design because I tried a number of the ones available that left me underwhelmed. This wheel is 5.5" dia. I already have a nautilus style, wanted to try a round one for Field Target. If you make small scale adjustments…
- Downloads
- 500
- Likes
- 32
- Rating
- 5
P
PrintablesVik
Silencer For .177 Airguns (Zoraki etc.)
An airgun silencer, model supplied for .177 calibre, with K-type baffles that prints without support. Particularly useful for silencing CO2 and pneumatic airguns. Firearms will just blow it to bits and may present multiple hazards, so…
- Downloads
- 467
- Likes
- 33
- Rating
- 0
P
Printablesquietmesh
Shooting targets for airguns - Fits standard 140x140mm target holder
Have some fun shooting your own targets They are 139x139mm just to be sure they fit As we say in Sweden (Sorry, dosen't translate well to english): Skjut inte upp till morgondagen det du kan skjuta ner idag!
- Downloads
- 435
- Likes
- 77
- Rating
- 4.5
P
PrintablesDarteKO
PCP airgun Silencer 1/2" UNF Thread
One piece printable PCP Rifle Silencer. Designed for ½ 20 UNF thread (compatible with many air rifles). Fully functional and suppresses most of the sound. Lightweight and durable. PETG, infill 100% 0.20 layer height,
- Downloads
- 404
- Likes
- 22
- Rating
- 0
P
PrintablesJohn Doe
Airgun silencer (Rotex RM8)
There are countless 3D printable silencers on the internet, but I wanted to have my own version. This is designed to fit on the tube of the Walther Rotex RM8 (.177), if the printer is set up correctly, it does not require any rework. It…
- Downloads
- 379
- Likes
- 17
- Rating
- 0
P
PrintablesTaskForge
Diabolo Airgun Pellets - various Options
The diabolo airgun pellets are scaled to 1 inch and can be scaled down to the desired size as needed. For use in PCP airguns only, never use lightweight pellets in in spring powered airguns.
- Downloads
- 352
- Likes
- 53
- Rating
- 4.5
P
Printablesquietmesh
Silencer for airguns and air pistols - Mini - Standard thread
Disclaimer: Please obey your countrys law regarding silencers. Fits .177 (4.5mm) and .22 (5.5mm) caliber airguns It might be tricky to get the threads right, if you have a threaded tap, use it :D See my full size suppressor here:…
- Downloads
- 352
- Likes
- 41
- Rating
- 0
P
PrintablesLupen
Picatinny rail adaptor for Daisy Red Ryder airgun (and other accessories)
Here is an upgrade of Daisy Red Ryder airgun for my son. Picatinny rail for bipod was made by me. It is not perfect but it works. Here you can download the folding bipod: https://www.printables.com/cs/model/321956-bipod-for-picatinny Here…
- Downloads
- 337
- Likes
- 39
- Rating
- 0
P
PrintablesNickFAdame
Airgun Pellet .177 Caliber with 3.5mm bearing
Airgun pellet in .177 caliber for pellet rifles. The recess in the top is made to fit a 3.5mm bearing (for weight). They will not function without the bearing. I got 500 ball bearings in 3.5mm off amazon for 8 dollars. I've only made a…
- Downloads
- 295
- Likes
- 40
- Rating
- 0
P
PrintablesBogomips
WIP: Airgun pellet box
Airgun pellet box for 4,5 mm (.177) ammunition. It's an attempt to replicate competition box that are expensive with one that should achieve the same goal with a speed filling mechanism. Update The staggered version is now available.…
- Downloads
- 269
- Likes
- 21
- Rating
- 5
P
PrintablesJakub Forst
Beeman p17 airgun silencer
A silencer for the Beeman p17 airgun
- Downloads
- 246
- Likes
- 24
- Rating
- 3
P
PrintablesDaniel Schultze
Airgun Pellets Pellet .177 cal 4.5mm
3 airgun .177 cal pellets -wadcutter -hollow point -pointed I print these in sets of 30-50 should take about a minute per using a 0.6mm nozzle Works quite well in my old crosman backpacker 1389
- Downloads
- 228
- Likes
- 14
- Rating
- 0
P
Printablesqman
Airgun Targets
I liked the Air Venturi Airgun Targets so i made a chicken and a goat based on them! Currently working on more. Comment any animals you would want to see! You'll need supports regardless of how you print them but i would print them flat…
- Downloads
- 218
- Likes
- 24
- Rating
- 0
P
PrintablesDaniel Kasprowicz
Box for airgun pellets
Box for airgun pellets in the shape of JSB Match Diabolo. The box can hold approximately 200 pcs of airgun pellets.
- Downloads
- 183
- Likes
- 18
- Rating
- 5
P
PrintablesJo
Needledart for airguns 4.5mm (.177)
Inspired of the famous Jörg Sprave and his “sixneedler”, i created a simple version of the darts for 4,5mm (.177) airguns. I printed it from TPU one at a time with random seam. Looks ok to me :-) The maximum powerlimit here in germany is…
- Downloads
- 182
- Likes
- 12
- Rating
- 0
P
PrintablesNickFAdame
.177 Cal Airgun Monocore Suppressor, 27mm Diameter (Monocore Only)
This is a 27mm diameter Monocore for a Monocore Suppressor for your .177 caliber airguns. THIS FILE ONLY INCLUDES THE MONOCORE. Since there are so many different-diameter barrel airguns, there is no way I could design an individual…
- Downloads
- 180
- Likes
- 15
- Rating
- 0
P
Printables75echo
AGT Vixen Buttstock. -airgun technology
Designed for use with the guns original/stock rubber shoulder pad.
- Downloads
- 167
- Likes
- 16
- Rating
- 0
P
PrintablesPcManny
Support wedge Airgun, Auflagekeil für Luftgewehre
Auflagekeil grade und 7° für Feinwerkbau Luftgewehre links auf anfrage auch rechts usw.. mit schraubbarer Klemme M6 Support wedge straight and 7° for Feinwerkbau airguns on the left, on request also on the right, etc.. with screwable…
- Downloads
- 161
- Likes
- 6
- Rating
- 0
P
PrintablesOscar A
FX Airguns 8 shot magazine .22 (5,5mm)
8 shot magazine for FX Airguns .22 (5,5mm) pellets. Should fit most FX rifles like Cyclone, Tarantula, SuperSwift, Ultimate, Whisper T12, Whisper MKII, Ranchero and the Ranchero Carbine. Matching O-ring is 20x2,5 NBR70.
- Downloads
- 159
- Likes
- 12
- Rating
- 0
P
PrintablesSebastian Larysz
4.5mm Airgun pellet box
Small box of 50 pieces of air gun pellets with cover. The perfect box for match pellets. Printing without support. You should turn the model flat side up.
- Downloads
- 154
- Likes
- 20
- Rating
- 3
P
Printables75echo
Dust/dirt filler plug for AGT Vixen airgun
Can be printed in PLA,PETG ,ABS,ASA or TPU 0.2mm layer height 20% infill. Update: i have added the version with space for an O ring for a tighter fit.
- Downloads
- 154
- Likes
- 8
- Rating
- 0
P
PrintablesLibaroba
Airgun Pellet Tin Locking Ring
Stackable accessory designed to keep your airgun pellet tins tightly sealed and secure inside bags, cases, pockets, … during transport. This two-part threaded ring consists of a base and a cap, both with matching threads, similar to a…
- Downloads
- 153
- Likes
- 12
- Rating
- 5
P
PrintablesBalconyWatcher
Reactive Exploding Target for Airguns, Pellet Guns, BB, Airsoft
Works very well, you can clearly see the puff of dust at 15 yards, and target stays intact after many shots from .22 pellet gun. I printed in PLA which seems to work perfect for this application. You can hang it or tape it to a target.…
- Downloads
- 149
- Likes
- 37
- Rating
- 0
P
PrintablesMatB
Weihrauch HW 97 airgun reloader with magazine
DESCRIPTION The mechanism for an easier and safer way of loading pellets for Weihrauch HW97. https://www.youtube.com/watch?v=DDRhrUY8kvM Full list of parts and tools in attached PDF READ FIRST before you decide to start work on this In…
- Downloads
- 136
- Likes
- 14
- Rating
- 0
P
PrintablesTritschi
Storage for your Airgun Pellets
Have total six different boxes in the file system. Different makes, different sizes of boxes 21/23/24mm, with or without “Match” text. You'll certainly find yours! I have two sets in place, one for my match pellets, another for other…
- Downloads
- 131
- Likes
- 23
- Rating
- 5
P
PrintablesCrooksUSA
FX Airguns Keychain
Just a simple FX Airguns Key chain I designed from their logo. I scaled down the stl file to 61.35% to get it to 80mm length. Printed with ATOMIC PETG Filament in grey and blue. If you like my designs and want to send me a tip, you can do…
- Downloads
- 124
- Likes
- 8
- Rating
- 0
P
Printables75echo
AGT Vixen Airgun barrel washer support -airgun technology
The AGN Vixen can experience loss of barrel alignment of a few centimeters when pressure is applied to the shrould either by holding the shroud or resting it against a support. This washer fits snugly into the small space between the…
- Downloads
- 123
- Likes
- 7
- Rating
- 0
P
PrintablesTaskForge
Airgun Slug - various Options
The airgun slugs are scaled to 1 inch and can be scaled down to the desired size as needed. For use in PCP airguns only, never use lightweight pellets in in spring powered airguns.
- Downloads
- 120
- Likes
- 9
- Rating
- 0
P
PrintablesZiad Ghadieh
4.5mm/.177cal airgun pellets
i got bored from normal pellets, so i created 2 types of pellets, one with a drill head, another with a hard pointy head
- Downloads
- 112
- Likes
- 16
- Rating
- 4
P
PrintablesFaceHaver
Loudener for airsoft / airgun
Pretty much just a joke item. Threaded for both standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF. No idea if it would actually work. Hope you have fun with it. I suppose if you actually had a muzzle loading airsoft…
- Downloads
- 96
- Likes
- 22
- Rating
- 0
P
PrintablesDaniel Kasprowicz
Box for airgun pellets - Exact
Box for airgun pellets in the shape of JSB Exact Diabolo. The box can hold approximately 200 pcs of airgun pellets.
- Downloads
- 96
- Likes
- 8
- Rating
- 0
P
Printableshrootzel
Loudener for Airsoft (14mm ccw) and Airguns (1/2-20 UNF) - Tractrix Horn Attachment
Another take on the Loudener design from the Simpsons. Print upside down without supports. Scale if the threads are too loose or tight. The design is based on the tractrix profile to better direct and amplify the pew pew sounds. The…
- Downloads
- 94
- Likes
- 9
- Rating
- 0
P
PrintablesCharles Coonz
Airgun .177 Pellet Box Protector
This is an external module to secure the air gun pellet box from accidentally opening. It costs around 6-10 EU on the market, so I thought it would be a nice thingy for those who are practicing competitive or hobby target shooting. (Note:…
- Downloads
- 90
- Likes
- 5
- Rating
- 0
P
Printables3DMegoldasok
CZ TEX086 Airgun Pistonhead
CZ TEX086 Airgun Pistonhead sparepart Print form TPU min. Shroe A90 or softer (I printed from Polymaker A90) Need 1pcs M5 countersunk screw 12-16mm long, and Blue Loctite threadlocker. Screw down 2-3 mm under the 3D printed plane.
- Downloads
- 90
- Likes
- 9
- Rating
- 0
P
PrintablesVisthum
DIANA Airgun sight height adjustment screw L&R thread M6x0.75
A simple screw knob for adjusting the elevation of the rear sight. It fits many airguns but it's made to fit older ones like the Diana Mod.5 air pistol. It's heavily based on Tjugt design that he made and the dimensions are all his. I…
- Downloads
- 90
- Likes
- 6
- Rating
- 0
P
Printablesleskop
JTS Airacuda max barrel weaver airgun
JTS Airacuda max barrel weaver airgun
- Downloads
- 81
- Likes
- 3
- Rating
- 0
P
Printablesevilthingsmaker
7,62 mm Diabolo for Airguns
9 mm Diabolo for Airguns with hole for lead ball (4,3mm, but 5mm also fits) for added weight just heat after some uses to get them to grip rifling again made for TPU to get more than -1- use print 25 to justify turning on printer advised…
- Downloads
- 75
- Likes
- 2
- Rating
- 0
P
PrintablesTim A
Umarex Trevox Airgun Rear Sight
I have a Umarex Trevox airgun for which the rear sight broke. The original sight is pretty fragile (and so is the 3D printed replacement)! I reverse engineered what was left of the original, and tweaked it somewhat for printing. I printed…
- Downloads
- 74
- Likes
- 3
- Rating
- 0
P
PrintablesBauerTho
Bottle Clamp 52 mm Airgun
A Bottle Clamp for an airgun that fits on a 52 mm bottle and has a picatinny rail to connect to a mount
- Downloads
- 70
- Likes
- 2
- Rating
- 0
P
Printablestopoyete
Modular airgun moderator/silencer for m10x1 thread.
Fully 3D printed airgun moderator/silencer designed for a Diana Chaser, but fits other M10x1 threaded air guns. The end cap can be easily removed by finger friction, in case it gets too tight the included wrench makes it easy to remove.…
- Downloads
- 69
- Likes
- 5
- Rating
- 0
P
PrintablesFredster
Stronger Head for AirGun
This is a stronger Head for the C02 Airgun from PALM Look at the Original
- Downloads
- 69
- Likes
- 11
- Rating
- 5
P
Printablesitsmeorisit
Low hardware picatinny bipod for airsoft/airguns
This is a shortened version of Tony's bipod on MakerWorld. The reason I shortened it is so that it is possible to use it in a prone position without shooting the treetops :P The original model can be found here: Rifle Bipod 200mm with…
- Downloads
- 68
- Likes
- 8
- Rating
- 0
P
PrintablesBogomips
Grips for Umarex Colt Government 1911 A1 airgun
After owning an Umarex Colt Government 1911A1 CO2 pistol (cal. 4.5 mm (.177) diabolo) I found that the right grip (CO2 cartridge cover) moved around a lot and the grips are not that good so I intended to adapt wooden grips from real 1911…
- Downloads
- 66
- Likes
- 8
- Rating
- 0
P
PrintablesDingus
Screw-on table mount for airgun, dremel flex shaft, etc.
Simple design, two drafted holes for pneumatic quick-release tools and dremel flex shaft handles. Designed specifically for use with ULINE stainless steel tables, but should work with any desktop under 40mm (~1.5in) I've included STLs as…
- Downloads
- 66
- Likes
- 16
- Rating
- 0
P
PrintablesOscar A
FX Airguns Cyclone magazine insert
Insert for ordinary 4,5mm pellet can that holds 4 FX airgun magazines
- Downloads
- 65
- Likes
- 4
- Rating
- 0
P
Printables75echo
Pellet tin holder for AGT Vixen -airgun technology
Print upright. 0.2mm layer height. Brim .
- Downloads
- 64
- Likes
- 3
- Rating
- 0
P
PrintablesDocHertz
Connector for th SHH!ot silencer for the PP700S-A airgun.
I made the SHH!oot silencer ( https://www.thingiverse.com/thing:4552394 ) for my 4,5mm Artemis PP700S-A airgun only to find out that the silencer didn't fit. Close inspection of the original photos also showed a different muzzle on the…
- Downloads
- 63
- Likes
- 5
- Rating
- 5
P
PrintablesTomasC
Tripod / bipod for airgun
Airgun tripod because guys can't hold a gun. M6 threaded rods from the store. Estimate and cut with a saw as needed. Self-adhesive foam rubber holds the tripod on the rifle. Possible modification for a bipod. NOW it's a sniper gun for…
- Downloads
- 62
- Likes
- 13
- Rating
- 0
P
PrintablesTjugt
DIANA Airgun Screw for Adjustement of Height
The two pictures show two different screws for the adjustement of height for old DIANA airguns. Many models used these screws. The older screws have a left-handed thread and the newer one have a right-handed thread. The newer ones can be…
- Downloads
- 61
- Likes
- 6
- Rating
- 0
P
PrintablesRaul Lugo
.30 Cal (7.62mm) Airgun pellet sorting trays
I needed some sorting trays for my .30 cal pellets. These were made in tinkercad to fit the .30 cal JSB Hades pellets in a head first orientation. They should fit other pellets of the same caliber, but the lid may need to be modified if…
- Downloads
- 54
- Likes
- 5
- Rating
- 0
P
PrintablesXibalba
Airgun targets
Airgun targets like they have in the carnaval shooting range please leave a like and a make if you like it :-)
- Downloads
- 50
- Likes
- 9
- Rating
- 0
P
PrintablesКалоян Дулев
Cover airgun .177 pellets box for JSB Exact and Heavy
Tested with JSB Exact .177 box. Files are print-oriented.
- Downloads
- 49
- Likes
- 3
- Rating
- 0
P
PrintablesTjugt
Moving Targets for Airguns
I designed this moving targeds to shoot on with airguns. I use it with 2 targets, moving at the same time. The system can also be reduced to a single target. I programmed it that way, that every time the carriage changes direction it also…
- Downloads
- 43
- Likes
- 18
- Rating
- 0
P
PrintablesCrooksUSA
FX Airguns USA Keychain
Another simple FX Airguns USA Key chain I designed from their logo. Printed with ATOMIC PLA Filament in silver and black. If you like my designs and want to send me a tip, you can do so via PayPal ….. Thank you and enjoy the models I…
- Downloads
- 42
- Likes
- 6
- Rating
- 0
P
PrintablesTjugt
DIANA Airgun Rail Adapter
These pieces are used to mount something onto a DIANA airgun. I have multiple DIANA airguns and this design works for all the models I have. You will need M3 screws in different sizes (usually M3x16 or M3x20) to finish the build. To mount…
- Downloads
- 40
- Likes
- 9
- Rating
- 0
P
Printablesqman
Wolf Airgun Target
A replaceable wolf target that snaps into a base. Holes in the base are fully through, so you can push out the broken plastic!
- Downloads
- 39
- Likes
- 5
- Rating
- 0
P
Printables75echo
PCP AIRGUN oil/water seperator holder clip
Print in PETG , 4 perimeters/walls, 0.2mm The link below is the oil/water separator /filter in the pictures above but it should work for many more on Amazon and Aliexpress with a diameter of about 30mm.…
- Downloads
- 38
- Likes
- 7
- Rating
- 0
P
Printables3DMakerNoob
Trotec Airgun Bench Holder
A bench stand for the Trotec airgun - prints without supports and attaches with 3 screws
- Downloads
- 36
- Likes
- 5
- Rating
- 0
P
PrintablesRunge Kutta
ZZ Prototype die for manufacturing 5.5mm lead slugs for airguns
Prototype die for manufacturing 5.5mm lead slugs for airguns This model is NOT functional; it is a prototype to test the concept and facilitate its manufacture on a metal lathe. The final metal product is a die that is used with a press…
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
Printableslucdu19
Support airgun ( HDX 68 ).
J'ai dessiné et imprimé ce modèle pour pouvoir stocker et exposer le HDX 68. Les 4 pieds peuvent être imprimés en FLEX ou en PETG mais avec un insert en caoutchouc. Imprimé en PETG, supports uniquement sur la molette, couche 0,2. 2…
- Downloads
- 29
- Likes
- 3
- Rating
- 0
P
PrintablesTony.252
Airgun Slavia 630 frontsight
Here you have two types of front sights for the Slavia 630 airgun. The first type is a standard open sight. The second type is designed to accommodate a 3 mm fiber optic rod insert. This second type is also provided in .f3d format for…
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
PrintablesEnderman Prints
Suppressor adapter for Umarex Walther CS88 pellet airgun
Suppressor adapter for Umarex Walther CS88 pellet airgun. Suppressor thread 1/2"-20 UNF, same as Huben suppressors.
- Downloads
- 28
- Likes
- 9
- Rating
- 5
P
Printableswaz
Victory / SMK CP2 Airgun Barrel shroud Nato rail
M3 heatset inserts used with M3 countersunk bolt for securing.
- Downloads
- 26
- Likes
- 3
- Rating
- 5
P
PrintablesWaffleStaffel
Remix of Stronger Head for AirGun
Modification of an air-duster design. If I've run afoul of licensing details, contact me and I'll correct.
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
Printablesdnshlk
Clip (magazine) for MR-651 "Crocodile" airgun (center part)
Центральная часть магазина барабана для Байкал МР-514 Крокодил. Внешнее кольцо в оригинальном посте: https://www.thingiverse.com/thing:5151390
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesMosieznyKociol
Ruger MKIV airgun stand
Simple stand for Umarex Ruger mk4 - if you want some changes hmu or feel free to modify it yourself - just credit me. The RMR mount is available on my profile btw
- Downloads
- 18
- Likes
- 6
- Rating
- 0
P
PrintablesIosley Carlos
HSW Airgun Amo Box
I made this to perfect fit amo for my 4.5mm airgun. Words well with PLA with 3 walls and 20% infill.
- Downloads
- 18
- Likes
- 4
- Rating
- 0
P
PrintablesNon Timebo Mala
Airgun Stock Extension for Airforce & Similar Rifles
INITIAL: 7/07/2024 I used the experimental "wrinkle finish" that Prusa slicer offers. Hilbert pattern would work as well. Over the years I've collected up plenty of bottles, regulators, barrels and parts for AF airguns. I got this Talon…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
Printablestoomanyhobbies
Umarex airgun pistol replacement rear sight
Replacement rear dovetail sight for Umarex Colt 1911 and Walther CP88 air pistols. It may fit other Umarex models as well and I will update if informed of it. Two versions: V1 uses single M4x5mm maximum length screw. It was my prototype…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
PrintablesM3DM3D
8mm Foster Magnetic Cap For FX Airguns and more
8mm Foster Magnetic Cap For FX Airguns and more
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesOnyxSkyDV
Spirit bubble level for BRK Ghost HP airgun
This is a cylindrical spirit bubble level holder to mount on the dovetail under the scope of a BRK Ghost HP airgun. Used a small cylindrical bubble spirit level vial from Amazon, 8×23mm sized. Vial snaps into mount and should slide over…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
Printablesdavidhirka
Airgun blow nozzle holder for Lidl wallmount organiser
Print on side with support Infill: 15% Support: Yes Resolution: 0,2
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesSebastian Larysz
Airgun shooting target 14x14mm's container
Container for storing and carrying shooting targets for air weapons measuring 14x14mm. Holds approximately 15 shooting targets. Required: 4x neodymium magnet 5x2mm
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesEnderman Prints
Airgun shooting base for small jack
Shooting base for small jack, a base box for jack for long distance bench rest shooting. Allows elevation of 25mm, 50mm, 75mm for a rifle jack, baseplate dimension of 120mmx80mm will fit. Base portion is with indentation for a pellet tin…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
Printablestoomanyhobbies
Beeman P17 airgun palm saver
Beeman P17 is a single stroke pneumatic overlever airgun. Closing the overlever with a dot sight mounted leaves very room for your palm and is 'unpleasant' to say the least if the rear open sight is mounted. I removed the rear sight and…
- Downloads
- 10
- Likes
- 3
- Rating
- 0
P
Printableswavescout
Hazet 9040-4 Airgun lever
Spare lever for a hazet 9040-4 air gun. Center hole with D2.5mm. Drill it up to 3mm if you want to use the original bolt or use a tap to cut a M3 for a screw.
- Downloads
- 9
- Likes
- 4
- Rating
- 0
P
Printablessabre666
Anschutz / FWB airgun cheekpiece support
This piece fits inside the wooden cheekpiece of older Anschutz air rifles, a baseplate is also provided in case the wood is not flat or damaged. In normal cases you dont need this piece. Print in ABS, ASA or another solid material, the…
- Downloads
- 9
- Likes
- 2
- Rating
- 0
P
PrintablesAlex Samorukov
W.E.R. 852D+ AirGun holder
This is the hot-air handle for the soldering station W.E.R. 852D+. The original was too loose, and the hot air gun constantly dropped from it, causing a significant risk. Done in OpenSCAD, source included.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesJordan Johnson
Airgun Ice Target
Here are some shoot-through ice molds intended for use as airgun targets. Three mounting options are available: stand base, wire hook, or nail hanger. The circular target is ~1.5in/38mm and intended for 35-50yd range. If you make a clean…
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
PrintablesEnderman Prints
Pull through barrel cleaner for airgun
Pull through barrel cleaner for airgun. Simple aid for cleaning airgun barrel quickly. Small and light to carry with. Additionally needed items -length of 4 mm PTFE tube -M2,5 self tapping screw -M2.5 steel washer -some braided fishing…
- Downloads
- 8
- Likes
- 5
- Rating
- 5
P
PrintablesDr. Failov
Airgun for Felisatti (КР-400, F41256)
Create airgin of your Felisatti (КР-400, F41256) spray gun. Suitable for cleaning evectronics from dust.
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printableslucdu19
Boite de rangement laser d'alignement pour airgun.
J'ai dessiné et imprimé cette boîte car il me fallait une boîte plus compact pour pouvoir ranger le laser. Imprimé en PLA, couche 0.2 , sans support. 6 aimants 9x3 mm.
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesBik_Craft
Hikoki Airgun sub attachment
this is a remake of a attachment for the sub that you can inflate with the hikoki airgun. feel free to upgrade my file
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesJiří Vrátný
Airgun Pellet Tin Holder / tray
A practical 3D-printable holder for airgun pellet tins, designed to be mounted directly onto a shooting stand or frame. It keeps your pellet tin securely in place and within easy hand reach while shooting, preventing accidental spills…
- Downloads
- 5
- Likes
- 4
- Rating
- 0
P
PrintablesJebalos
Nightsight for Umarex SPA Airgun
This Print is a replacement for the rear sight, which allows for change of color or glow in the dark night operation. Using PLA GLOW will work fine. One file is a scaled down version to 97% to make it less of a tight fit, otherwise minor…
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
Printablesjonsicoli
Airgun Trigger, Trigger guard & misc. parts (Unfinished)
Printed these in STL for a rusted airgun I made functional. Not sure the model of the airgun itself. Technically functional but fragile parts! I ended up not using the sightleaf because it's way too thin for the airgun.
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesRunge Kutta
Rail Weights for Arca Swiss bellow bottle rail in benchrest airgun.
I have an Arca rail on my FX Impact and need more weight for benchrest shooting. It is an adaptation of an Saber Tactical rail bellow the bottle Arca-Swiss rail that incorporates a compartment holding about 300 to 400 grams of lead…
- Downloads
- 3
- Likes
- 2
- Rating
- 0
P
Printables
Wolf Airgun Target
A replaceable wolf target that snaps into a base. Holes in the base are fully through, so you can push out the broken plastic!