Beeman P17 airgun palm saver
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cocking aid for Beeman P17 .177 pellet pistol. (It may work for Weihrauch HW40 as well).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Beeman P17 is a single stroke pneumatic overlever airgun. Closing the overlever with a dot sight mounted leaves very room for your palm and is 'unpleasant' to say the least if the rear open sight is mounted.
I removed the rear sight and used its mounting position for the 'palm saver'. You can use the same screw and nut from the rear sight. I had others so I used them instead. I believe this will fit the Weihrauch HW40 as well since the P17 is a 'clone' based on it.
Printed using Creality K1 Max and PETG. PLA should be fine for this application as well.
Files: TMH-P17_PalmSaver-R0.stl
Print settings: Print with the top face down, supports yes (to support the mounting hole). Used 3 walls and 25% infill.