Beeman P17 airgun palm saver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cocking aid for Beeman P17 .177 pellet pistol. (It may work for Weihrauch HW40 as well).
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Beeman P17 is a single stroke pneumatic overlever airgun. Closing the overlever with a dot sight mounted leaves very room for your palm and is 'unpleasant' to say the least if the rear open sight is mounted.
I removed the rear sight and used its mounting position for the 'palm saver'. You can use the same screw and nut from the rear sight. I had others so I used them instead. I believe this will fit the Weihrauch HW40 as well since the P17 is a 'clone' based on it.
Printed using Creality K1 Max and PETG. PLA should be fine for this application as well.
Files: TMH-P17_PalmSaver-R0.stl
Print settings: Print with the top face down, supports yes (to support the mounting hole). Used 3 walls and 25% infill.