Simple shelf for the Ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To protect the moving bed from grabbing cables (particularly a SD Card adapter ribbon cable) I created a simple shelf.…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
To protect the moving bed from grabbing cables (particularly a SD Card adapter ribbon cable) I created a simple shelf. Be sure to print logo-side down without supports for best result.
Modifications available upon request.
To install, you will need to detach the display unit. The shelf fits snug, but not 100% gapless. (intended, as to not have to force it in)
EDITJune 15th, 2019:
Added a left-hand side version to fill up the gap when using the (awesome!) full-width electronics enclosure by Teaching Tech; https://www.thingiverse.com/thing:3688967
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
.12
Infill:
20% or up
Filament:
Creality3D PLA White
Notes:
I used Slic3r with Hilbert curve for the top and bottom layers as I find it gives a great finish, but any slicer will do, just make sure you have a good resolution. (.24 was too course for my taste)
Category: 3D Printer Accessories