VZ Bot 235 and VZ Bot 330 Nozzle Wiper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VZ Bot 235 and VZ Bot 330 Nozzle Wiper
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 915
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
VZ Bot 235 Nozzle Wiper
the holder for the Wiper Pad is adjusted in leght to the Bambu Lab A1 Nozzle Wiper Pad
Bambu Lab A1 Nozzle Wiper
AGF-RC B13DLMV2 Servo to buy on Aliexpress https://www.aliexpress.com/item/1005001887992933.html?spm=a2g0o.productlist.main.1.3180myFymyFytr&algo_pvid=630868fa-93bf-4122-8d2a-d15a164bee18&utparam-url=scene%3Asearch%7Cquery_from%3A
follow up for an MG90 Servoholder
Possible Pins RGB or Probe, you need a Hardware PWM Pin
Please change the x and y positions for the Wiper for your setup
only for AGF-RC B13DLMV2
[servo wipeServo]
pin: PE10
minimum_pulse_width: 0.0005
maximum_pulse_width: 0.0025
maximum_servo_angle: 180
initial_angle: 0
#initial_pulse_width: 0.0015
[gcode_macro CLEAN_NOZZLE]
gcode:
G1 Z 35
SET_SERVO SERVO=wipeServo ANGLE=90
G4 P2500
G1 X104 Y225 F5000 # Start position Wiper
G1 X140 F5000 # End position Wiper
G1 X104 F5000 # Start position Wiper
G1 X140 F5000 # End position Wiper
G1 X112 Y110 F5000 # custom positio after wipe
SET_SERVO SERVO=wipeServo WIDTH=0 # OFF
________________________________________________________________________________________________________________
V1.0 New Wiper Mount, ridgid Servo Mount no Servo wobble