1 / 3
ARCANE - Finn's Lighter - Skin For Zippo
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have a classic Zippo and a 3D printer, you can now have the perfect and fonctional Finn's Lighter in your hands.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 963
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (46)Powiązane
Here is a zippo version of Finn's lighter that I made for cosplay.
(Take a look at my library for more)
Instructions:
-Both parts of the skin must be printed with a maximum number of walls (8 will be sufficient by default)
-Supports have to be on for the part A
-Depending on your settings the zippo can be tight in the skin, you can heat the interior of the 3d printed parts to solve this problem.
Have fun et Voila.