Wyniki wyszukiwania: lighter

Gridfinity 1x1 Slim Clipper Lighter Stand (4 lighters-CP 21)

Gridfinity 1x1 Slim Clipper Lighter Stand (4 lighters) Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download

Gridfinity 1x2 Slim Clipper Lighter Stand (10 lighters-CP 21)

Gridfinity 1x2 Slim Clipper Lighter Stand (10 lighters) Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download

Lighter case for BIC mini

Bold lines and sharp edges define this 3D-printed lighter case, inspired by the energy of the techno scene. With a futuristic, industrial feel, this lightweight, fast-to-print case is perfect for those looking to make a statement. This…

Hyundai Ioniq 5 Charge Port Highlighter

Add this charge port highlight for your North American Hyundai Ioniq 5 to make it easier to see the charge port at night, especially with the bright charge indicator LEDs to the right that wreck night vision. Print instructions Recommend…

Battery to USB/Cigarett lighter box

Battery to USB/Cigarett lighter box

Bic Lighter Sleeve

Please Attributions go to: https://www.printables.com/@dtxtr_339032

Molle short lighter holder (Molle držák krátkého zapalovače)

Molle lighter holder for backpack belt, etc. Molle držák zapalovače na batoh opasek atd.

Bic Wick Lighter Holder

This holder transforms a standard Bic lighter into a more efficient wick-based lighting tool, perfect for those who prefer a cleaner, butane-free flame experience. The design features a secure holder for your standard sized Bic lighter…

VW T6 Lighter Blank

Friend of mine wanted a blank for his 12v socket on His T6 van. 20 mins in fusion and this is the end result. Feedback says it fits fine as is. V6 may need scaling in either direction slightly (-+1%)

Lighter Gun Case with Lighter Size Options

A lighter case that makes your lighter look like a gun. If you have a lighter that does not fit these dimensions, please don't hesitate to reach out. I'd be more than happy to make some adjustments to make this fit more lighters. The more…

Bic lighter holder for Bernzomatic torch

Holder for a small Bernzomatic butane lighter that can hold a Bic lighter. Also fits a clipper lighter. Handy if the torch is good but the igniter is broken like my torch. Best option for the lighter is a Bic Ez Reach, this is angled so…

Car cigarette lighter usb

I used the Mazda Miata cigarette lighter replacement for my Mitsubishi Evo and a DC12V USB Converter to make a USB plug. The USB Converter I used.…

Extended Clipper Lighter Sleave

The model was modified by extending the top part to fully cover the lighter, eliminating the previous gap.

ELFX Vape car cigarette lighter Adapter

Printed the Model with TPU fits tight in car cigarette lighter slot and vape slides in perfect to grab any time.

BIC Secure-Grip Lighter Sleeve

🔥 BIC Secure‑Grip Lighter Sleeve 🔥 A print‑ready sleeve optimized for any 3D printer—no supports, minimal filament use, and gentle overhangs. Its compliant walls adapt to slight size variances across Bic Classic, Bic Classic Push, Bic EZ…

Case Gauge 9x19-100 - lighter

20% lighter 100rnd case gauge pitched for P-100-9 case-gard.

Kybalion Joint + Lighter Case

The Kybalion (full title: The Kybalion: A Study of the Hermetic Philosophy of Ancient Egypt and Greece) is a book originally published in 1908 that has stood the test of time. It is a book about metaphysics- the idea that all stems from…

HSW lighter storage

Storage for lighters for honeycomb storage wall.

IKEA Skadis Lighter Holder BIC

Support structures: Yes Material: PLA

Prusa Core One/+ Squash Ball Feet - Lighter Faster (slighlty) Sturdier

A little bit Lighter Faster & Sturdier than the original design : Kudos to the original designer, do not hesitate to grab him a coffee by tipping him : https://www.thingiverse.com/dancan13f/designs I used the 2 yellow-points balls since I…

EDC case for a Cricket lighter with a bit holder

This is a 3D printable compact EDC case designed specifically to fit the Cricket lighter . It provides secure protection for the lighter while featuring a built-in hole to hold standard 1/4" screwdriver bits , making it a practical…

Bic Lighter Holder

Bic lighter holder that is in two pieces to attach to bong

State themed cigarette/joint + lighter cases

I designed a joint/cigarette + lighter case for every state! These state-themed designs are variations of something I designed awhile back called the Tokédex. The Tokédex is a clamshell container, print-in-place, no post-print assembly…

Karan King Lighter case 12 different designs

There are so many hulls for Bic lighters and not a single one for Karan King so i made one. Two Print Profiles The by layer profile can be used for most printers. The other profile uses the print by object mode and may not work on other…

Brickfinity Lighter Two-Piece Bins

I redesigned the bins to use around 20 percent less material (in the case of the 2x2 bin) and have a thinner lip that is separately glued on. This version prints slightly better with faster profiles and the underside of the lip is smooth…

Clipper Lighter Display - Text Remix

Ich präsentiere Ihnen meine Display für Clipper Feuerzeuge. Erhältlich in Versionen von 1-10 und 15 Clipper. Sie können gerne nach weiteren Versionen und Modifikationen fragen, ich werde diese gerne berücksichtigen. Ich habe dieses Design…

DJeep Turbo Lighter Multiboard Mount

Volador VX3.5 / 3 Lighter Motor Guards

Took @Zelas_422011 's great design and reduced the weight by booling

Lighter Kayoumini 2.5 Flywoo O4 Wide Lens Mount (for the Kit / Camera)

Reduced weight of @mosch_3121698 's design by +1 gram. Adapted to 15mm standoffs. 25 degrees only.

Slim Bic Lighter Sleeve

The decorative BIC lighters will be a very snug fit. I recommend the solid color options or remove the decorative film.

Bic mini lighter hiding place

This cover is specifically designed for the BIC Mini lighter (model J25)

Gridfinity highlighter holder

This is a gridfinity bin that can hold 6 highlighters (18mm size). Created using Gridfinity add-on for Fusion and modified.

BMW F44 CupHolder Insert for Coins and Lighter

This custom-designed cup holder insert is made specifically for the BMW F44 and may also fit other similar BMW models with identical cup holder dimensions. The insert fits precisely into the original cup holder and provides practical…

Zippo Lighter Display Stand – Holds 12 Lighters

This is a display stand designed for Zippo-style lighters. It holds up to 12 lighters in a raised layout that ensures full visibility of each piece. Nothing sits in front of the lighters, so every design, engraving, or embossed detail…

Accessory Power Outlet (cigarette lighter socket)

Accessory power outlet/auxiliary power outlet/cigarette lighter socket I couldn't find any existing models that are robust, so I made it instead. This socket uses a hose clamp and some fasteners. It can be used inline, or mounted to some…

Bic Lighter Case Osprey

This style case is my final version of my Bic lighter case design. It has my trademark insignia on the inside. Lighters are held snugly but are not impossible to remove or insert.

Bic Lighter Case Tree of Life V2

This style case is my final Bic lighter case design. It has my trademark insignia on the inside. Lighters are held snugly but are not impossible to remove or insert. I will upload the newest versions of my models if and when they get over…

Bic Lighter Case Rick and Morty V3

This style case is my final Bic lighter case design. It has my trademark insignia on the inside. Lighters are held snugly but are not impossible to remove or insert. I will upload the newest versions of my models if and when they get over…

BIC Lighter Case – Glock Drum Magazine Style with Internal Stash Compartment

This is a creative lighter holder inspired by a classic Block-style drum bagazine design , made to fit a medium-size BIC lighter . ⚠ This product is a decorative novelty lighter case only . It does NOT function as a real bagazine or any…

Bigger and Lighter Simple Indor Glider for 300x300 printers

Bigger and lighter simple Indor glider for 300x300 printers, with moved CG (longer front fuselage).Print with15% infill.

NANA Vivienne Westwood Orb Shin's Lighter

You need to add 6mm rhinestones and small 55mm electric lighter You will need supports for cross, and maybe for part 3. Arter printing sand and paint it in silver paint.

Container for lighter and six cigarettes.

Container for a lighter (small bic) and six slim cigarettes. (may be waterproof :))

Ford Lighter Cover

Slicer: Cura Material: PETG (CRON) 🔧 Nozzle & Layer - Nozzle Diameter: 0.4 mm - Layer Height: 0.16 mm - Initial Layer Height: 0.16 mm 🌡 Temperatures - Nozzle Temperature: 235 °C - Bed Temperature: 80 °C 🚀 Speeds - Print Speed: 32.5 mm/s -…

bmw 1-2-3 series cigarette lighter

bmw 1-2-3 series cigarette lighter 3 d model

lighter plug Škoda Superb 3

this is a ligher plug for the skoda superb 3 may work on the skoda octavia 3 not sure havent tested.

Tokédex- a clamshell cigarette/joint + lighter case

Carry your smokes and lighter wherever you go! The Tokédex conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going, picnicking, you…

Lighter case for BIC mini

Enhance your lighter with this 3D-printed case, featuring smooth curves and spiral designs that feel great in your hand. Perfect for those who value both style and a satisfying tactile experience, this case is lightweight, quick to print,…

Lighter case for BIC mini

Enhance your lighter with this 3D-printed case, featuring smooth curves and spiral designs that feel great in your hand. Perfect for those who value both style and a satisfying tactile experience, this case is lightweight, quick to print,…

Lighter case for BIC mini

This custom 3D-printed lighter case showcases small, repeating geometric patterns that are visually striking. Designed for aesthetics, it adds a clean, modern touch to your lighter while remaining lightweight and quick to print. This case…

BIC lighter-case

A case for BIC lighters. Designed for the J23 size. The case has a grid-like pattern of gaps, allowing you to enjoy the combination of the lighter's color and the printed design. We recommend printing with ABS filament.

lighter extension

lighter extension remix.

Gas lighter holder

good to hang BIC type gas lighter

Ekko Firelighter Mask - Arcane

This is a digital 3D printable model of Ekko’s Firelighter Mask from League of Legends: Arcane . 📦 Included Files STL (cut for 200mm printer beds) STL (gold and white parts separated) 3MF pre-supported, colored file Assembled OBJ file…

VAG Cigarette Lighter Removal Tool (T40148)

Tool for extracting cigarette lighter. PETG recommended, place models for printing like displayed on screenshot. Be aware that tool could be hard to remove from 12v socket if you put it in the socket and don't extract socket from it's…

Cigarette pack and lighter holder

Designed for efficiency and a slim profile, this dual-compartment sleeve ensures your pack and lighter are always exactly where you need them. Why This Design? This isn't just a protective case; it's a functional holder designed for…

Mini Bic lighters case V2 - Pine Makers

Snap-Fit Flip-Top Mini Bic Lighter Case This custom-designed case transforms a standard Mini Bic lighter into a sleek, flip-top lighter with a satisfying magnetic open-and-close action. This upgraded version features a smart snap-joint…

The Flamethrower! A clamshell cigarette/joint + lighter case

Carry your smokes and lighter wherever you go! The Flamethrower conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going,…

easy access BIC lighter holder for Skadis

Needed a lighter holder that was at an angle for my skadis. The tclip system works perfectly for this!

BIC lighter safety clip

Safety clip that keeps the buton of the lighter from being depressed while its stowed away.

Gridfinity 1x1 Clipper lighter holder with magnet holes

An easy gridfinity 1x1 model for normal clipper lighter (not the smaller ones!).

Ender 3 V3 SE Lighter Fan Shrouds

3rd photo shows how it should be laid out. Takes similar inspiration from another shroud , but is designed around the shroud being remixed. Supports aren't needed, but it may look nicer if printed with ironed supports. If you're looking…

Zippo Lighter Collection Holder for Honeycomb Storage Wall

Fits the exceedingly popular Honeycomb Storage Wall system by RostaP. This is a holder for them as has a collection of Zippo lighters, or similarly shaped fire dispensing objects. Available in 1, 2, 3, or 4 column wide versions which hold…

BIC Lighter Cover Studio 1 - Cover Accendino BIC

BIC Lighter Sleeve Cover Studio 1 - Cover Accendino Bic Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property…

BIC Lighter Cover Studio 3 - Cover accendino BIC

BIC Lighter Cover Studio 3 - Cover accendino BIC Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of…

BIC Lighter Sleeve Cover Studio 1A - Cover Accendino BIC

BIC Lighter Sleeve Cover Studio 1A - Cover accendino BIC Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the…

BIC Lighter Sleeve Cover Studio 4 - Cover accendino BIC

BIC Lighter Cover Studio 4 - Cover accendino BIC Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of…

BIC Lighter Cover Studio 7 - Cover Accendino BIC

BIC Lighter Cover Studio 7 - Cover accendino BIC Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of…

Even Harder to Steal Bic Lighter Case

This case is scaled to max MK3 and X1C print size. It's chunky in the hand and not so easy to stuff in a pocket. Bic logo is painted for multicolor printing. Slips in easy but doesn't come out! Want to go SMALLER? Grab the “Hard to Steal…

BIC Lighter Sleeve Cover Studio 2A - Cover Accendino BIC

BIC Lighter Sleeve Cover Studio 2A - Cover accendino BIC Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the…

BIC Lighter Sleeve Cover - Studio 8 - Cover accendino BIC - Voronoi Design

BIC Lighter Sleeve Cover - Studio 8 - Cover accendino BIC - Voronoi Design This a Voronoi design 3D printable Bic lighter sleeve Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed this file, please…

Bic Lighter Keychain

Bic lighter keychain, fits snug but is easy to take out. Use supports for the ring part. I've printed it in PLA and PETG.

Mount for a lighter-socket USB power supply on the frame of the Mini-El/City-el

Print at 0.3mm layer height or whatever suits you. PETG or ABS is recommended so it doesn't melt in the heat of the summer. Clicks directly onto the frame wherever you like to put it. It's a loose fit - if you want it to grip tighter the…

Gridfinity 1x1 TorchBlue Butane Torch Lighter

Gridfinity 1x1 holder for butane torch. Measures 27mm diameter and 75mm depth.

Lighter weight tool head bambu x1c

Lighter weight tool head bambu x1c

2001-2018 Mopar Cigarette Lighter Fill Plug

This plug is specifically designed for Dodge, Jeep, and Chrysler vehicles using Mopar part number 4793555 (or equivalent). It fits into the dashboard hole left by the removal of the cigarette lighter providing a cleaner look. The plug has…

VW Logo for ashtray/cigarette lighter charger (VW Passat B6/ B7/ B8/ ARTEON/ CC/ R36)

use 100% infill and add the pause macro at the right layer. I used a 0.25mm nozzle with 0.1mm layer height this is the charger I got from aliexpress for my passat b8, but they say they have models for Passat B6/ B7/ B8/ ARTEON/ CC/ R36.…

Honeycomb Bic lighter case

Honeycomb Standard Bic Lighters come in two unique styles: Solid Honeycomb and Hollow Honeycomb. Both designs offer a sleek, textured grip, perfect for everyday use or outdoor adventures. Add a keychain or paracord to easily connect them…

Lighter Gun V12

Print it in PLA or PLA+ (may work with PETG) Quality setting in slicer 250mm/s First layer speed 50 (Works best for me) @0,16 layer height no brim use support may work with PETG (These are settings in the video)-(Anycubic Slicer)-(Printed…

Dummy 13 right hand lighter

Someone requested that I make a light forthe Dummy 13 right hand so that they can use it with the left hand bong model .

EDC holster for torch, peanus lighter and small SAK

A custom holster for my EDC kit that keeps my key chain from becoming overloaded. It includes space for a Mini Champ Alox, a peanut lighter, and a Rovyvon A8. The holster has a place to hold the lighter when lit so it can be moved without…

Double BIC Lighter Holder

Nothing special to print - no supports, whatever infill and material you please. Thanks for the base model Dom!

acetech lighter s cover

acetech lighter s cover. remove cap and use this item

boobie naked lighter case

was bored so i made this modeled with a makerpro moose 3d camera and a little help from the gf Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)

Gridfinity 2x2 Clipper Stand (12 lighters)

Gridfinity 2x2 Clipper Stand (12 lighters) Kindly, LIKE if you download

Gridfinity 2x1 Clipper Stand (6 lighters)

Gridfinity 2x1 Clipper Stand (6 lighters)

Clipper lighter holder for HSW

A holder for a standard-sized Clipper lighter for HSW.

Gridfinity 1x1 Slim Clipper Lighter Stand (4 lighters-CP 21)

Gridfinity 1x1 Slim Clipper Lighter Stand (4 lighters) Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download

Gridfinity 1x2 Slim Clipper Lighter Stand (10 lighters-CP 21)

Gridfinity 1x2 Slim Clipper Lighter Stand (10 lighters) Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download

Gridfinity 2x2 Slim Clipper Lighter Stand (20 lighters-CP21)

Gridfinity 2x2 Slim Clipper Lighter Stand (20 lighters)- Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download

BMO magnetic juul sleeve for keychain/lighter leash

got tired of misplacing my juul model is oriented as it is intended to be printed no supports necessary has a cavity for a 6x3 neodymium magnet included in model glue in the magnet, color BMO's features (if you'd like) and enjoy

lighter hemp wick

Print it and let’s smoke!

Gun Grip Bic Lighter Sleeve 2.0

Inspired by custom gun grips, my new Bic Lighter Sleeve has an awesome tactile hand feel, gives a satisfying POP when you remove the Bic, and I think it looks bad ass! Check out Dragon Scales 2.0 👇 There's a fin inside to keep a good grip…

Cigarette lighter plug cover for Ford Fiesta 2008-2010

Cigarette lighter plug cover for Ford Fiesta 2008-2010 with text "Ford".

Lighter case for BIC mini

Enhance your lighter with this 3D-printed case, featuring smooth curves and spiral designs that feel great in your hand. Perfect for those who value both style and a satisfying tactile experience, this case is lightweight, quick to print,…

Lighter case for BIC mini

Enhance your lighter with this 3D-printed case, featuring smooth curves and spiral designs that feel great in your hand. Perfect for those who value both style and a satisfying tactile experience, this case is lightweight, quick to print,…

Lighter case for BIC mini

Enhance your lighter with this 3D-printed case, featuring smooth curves and spiral designs that feel great in your hand. Perfect for those who value both style and a satisfying tactile experience, this case is lightweight, quick to print,…

Lighter case for BIC mini

This custom 3D-printed lighter case showcases small, repeating geometric patterns that are visually striking. Designed for aesthetics, it adds a clean, modern touch to your lighter while remaining lightweight and quick to print. This case…

Lighter case for BIC mini

This custom 3D-printed lighter case showcases small, repeating geometric patterns that are visually striking. Designed for aesthetics, it adds a clean, modern touch to your lighter while remaining lightweight and quick to print. This case…

Lighter case for BIC mini

This custom 3D-printed lighter case showcases small, repeating geometric patterns that are visually striking. Designed for aesthetics, it adds a clean, modern touch to your lighter while remaining lightweight and quick to print. This case…

Lighter case for BIC mini

This custom 3D-printed lighter case showcases small, repeating geometric patterns that are visually striking. Designed for aesthetics, it adds a clean, modern touch to your lighter while remaining lightweight and quick to print. This case…