Compact Lighter Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
[7.0] An elegant palm-stone design with a click-lid and space for a rollie.
- Ocena
- 4,667 / 5
- Polubienia
- 133
- Pobrania
- 648
- Wydruki
- 6
- Wyświetlenia
- 4384
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Important:
the Lid is best printed up-side down
i have come across ‘fake’ BIC lighters, which will sit loose. It's easy to tell by the quality though
the cigarette compartment fits a self-rolled 75mm length, 6mm Ø cigarette (slim filter)
Layer Height | 0.12mm |
Nozzle Size | 0.4mm |
Print Jerk | > 8mm |
Supports | Yes, Everywhere / On build plate |
Wall Count | 4 |
Z-seam (Cura) | Sharpest Corner, Hide Seam |
Design:
** Updated to 7.1 with Lid-clip and tighter tolerances.
Went through many iterations to balance the best feeling shape, spliff size and fit of the Bic. The seating and clamping force of the lid was optimised.
I would love to implement an o-ring, but with this design there is simply no space. I prioritised compactness and feel. Might make another more spliff oriented version.
Cigarette size:
Even though it might not look like it, it houses a full self-rolled cigarette (Rollie) of 75mm height.
Filament used: Tinmorry PLA+ Matte Black
I would love to see your color combinations!
If you like my work, you can buy me a coffee.
Much appreciated!