Mount for wireless rear speakers to standing lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount Samsung SWA-9500S rear speakers to Ikea NOT standing lamp.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't had(/wanted to waste) space to add seperate speaker mounts, also I didn't wanted to screw them to the wall. As I have the Ikea NOT behind my couch, I like indirect light much more, I designed a mount for my Samsung SWA-9500S.
Note:
- Not included in the files is a 40 x 50 mm (40 x 45 mm for TÅGARP) and 1 mm high TPU layer to have an anti-slip layer between the lamp and the mount. Just create it via your slicer.
- the damper should be printed in TPU I'm not sure if it useful or not, but I thought better safe then sorry
After printing you push in 4 M3 nuts to the front model, place the damper between the speaker and the front and screw it together with a 1/4-20 screw (about 20 mm long), then you hold the anti-slip layer and the front against the lamp pipe, screw on the rear with 20-30 mm M3 bolts together and your finished.
Ikea is not selling the NOT lamp anymore and the new TÅGARP is 2.5 mm thinner in diameter, therefor I added a version for this as well.