Hexagonal handle tool (punch, chisel, deburrer, nail setter) holder for HSW, Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for tools with hexagonal handles such as punches, chisels, deburrers and nail setters for Honeycomb Tool Wall
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Honeycomb storage wall holders for various sizes of tools with hexagonal handle such as punch, chisel, deburring tool and nail setter. Holds the tool securely. Tool can be easily picked from the holder.
There are holders available for handle sizes (measured between the edges of the hex, not the tips) from 6 to 20 mm. In addition, there is a parametric file for Fusion 360 available which will allow adjusting any dimensios, e.g. tool width, holder height, wall thickness and HSW peg dimensions.
Uses standard hex plug which attaches to a regular Honeycomb Storage Wall insert.
Easy to print. No supports needed. I used PLA, 0.4mm nozzle, 0.2mm layer height, 2 wall loops.